3M 7010360352 Trizact 237AA Abrasive Belt 60x2 Inch

Product Description

The 3M 7010360352 is a Trizact 237AA coated abrasive belt designed for intermediate finishing and fine polishing in metalworking and fabrication environments. It uses 3M microreplication technology, where micron-graded aluminum oxide mineral is formed into uniform three-dimensional pyramids and bonded to an X-weight cloth backing. As the pyramids wear, fresh, sharp cutting edges are continuously exposed, delivering a consistent cut rate and predictable surface finish from the start of the belt's life to the end. The belt measures 60 inches in length and 2 inches in width, suited for narrow-contact belt finishing applications.

This belt is used in industrial and shop environments where fine, repeatable surface finishes are required before downstream processes such as plating or buffing. The flexible cloth backing conforms to contoured workpieces, making it suitable for both flat and irregular surface finishing. Its consistent three-dimensional abrasive structure also makes it well suited to automated and robotic belt finishing systems where finish predictability and long abrasive life reduce changeover frequency and process variation.

Key Features

• Microreplication technology forms aluminum oxide into self-sharpening pyramidal structures for consistent cut throughout belt life
• Runs cooler than conventional abrasives, reducing heat buildup on workpiece surfaces
• Flexible X-weight cloth backing conforms to contours for uniform finish across irregular geometry
• Produces finer finishes than conventional electrostatically coated abrasive belts
• Designed for intermediate finishing and fine polishing prior to plating or buffing operations
• Three-dimensional abrasive design supports consistent results in robotic and automated finishing applications

Compatibility

Designed for use on belt finishing machines accepting 2-inch wide by 60-inch long abrasive belts in metalworking, fabrication, and automated finishing applications.

Installation Notes

Installation should be performed by qualified personnel familiar with abrasive belt equipment. Confirm the belt grinder or finishing machine is fully de-energized and locked out before changing belts. Verify belt tracking alignment after installation and before resuming operation. Always confirm the machine's maximum belt speed rating is compatible with the abrasive belt specifications prior to use.

Technical Specifications

• Abrasive Mineral: Aluminum Oxide
• Backing Material: X-Weight Cloth
• Belt Length: 60 inches
• Belt Width: 2 inches
• Color: Gray
• Weight: 0.18 pounds
• Unit of Measure: Each

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010360352