3M 7010360308 Abrasive Belt 24x1/2 Inch Aluminum Oxide

Product Description

The 3M 7010360308 is a Trizact 237AA coated abrasive belt designed for intermediate finishing and fine polishing in metalworking applications. It uses 3M microreplication technology, where micron-graded aluminum oxide particles are formed into three-dimensional pyramids and bonded to an X-weight cloth backing. As the pyramids wear down during use, fresh sharp mineral is continuously exposed, producing a consistent cut rate and a predictable fine finish throughout the belt's service life. At 24 inches long and 1/2 inch wide, it fits standard narrow-belt finishing machines used in production and job-shop environments.

This belt is suited for intermediate finishing and fine polishing steps prior to plating or buffing operations on metal parts. The flexible cloth backing conforms to contoured surfaces, making it effective on complex geometries. Its three-dimensional abrasive structure delivers repeatable, uniform surface finishes, which is especially valuable in robotic and automated finishing lines where consistency across cycles is critical. It is also used in manual belt finishing operations where a controlled, predictable finish is required before downstream surface treatments.

Key Features

• Microreplication technology forms aluminum oxide into self-sharpening pyramids that continuously expose fresh cutting edges
• Runs cooler than conventional coated abrasives, reducing heat-related workpiece distortion
• X-weight cloth backing provides flexibility for finishing contoured and complex surfaces
• Three-dimensional abrasive design produces consistent finishes throughout the full belt life
• Suited for intermediate finishing and fine polishing prior to plating or buffing
• Produces finer surface finishes than conventional electrostatically coated abrasive belts

Compatibility

Designed for use on standard narrow-belt finishing machines that accept 24-inch by 1/2-inch abrasive belts; appropriate for metalworking finishing operations including pre-plate and pre-buff preparation.

Installation Notes

Installation should be performed by a qualified metalworking or machine operator following the belt grinder or finishing machine manufacturer's guidelines. Ensure the machine is fully de-energized and lockout/tagout procedures are followed before changing belts. Verify belt tracking and tension per the equipment manufacturer's specifications before resuming operation. Inspect the belt and contact wheel or platen for wear or damage prior to each use.

Technical Specifications

• Belt Length: 24 inches
• Belt Width: 1/2 inch
• Abrasive Mineral: Aluminum Oxide (AO)
• Backing Material: X-weight cloth
• Color: Gray
• Abrasive Technology: Trizact microreplication
• Unit of Measure: Each
• Weight: 0.02 pounds

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010360308