3M 7010360151 Abrasive Belt 60x1 Inch Aluminum Oxide

Product Description

The 3M 7010360151 is a Trizact 237AA abrasive belt engineered for intermediate finishing and fine polishing applications. It uses 3M proprietary microreplication technology in which micron-graded aluminum oxide mineral is formed into uniform three-dimensional pyramids and bonded to an X-weight cloth backing. As the pyramids wear during use, fresh sharp cutting edges are continuously exposed, delivering a consistent cut rate and a predictable, fine surface finish throughout the life of the belt. Measuring 60 inches in length and 1 inch in width, this belt is well suited for automated and robotic finishing lines where finish repeatability is critical.

This belt is designed for intermediate finishing and fine polishing steps prior to plating or buffing operations. Its flexible cloth backing conforms to contoured workpiece surfaces, making it applicable across flat stock, tubing, and complex profiles. The three-dimensional abrasive structure produces finer finishes than conventional electrostatically coated abrasives, reducing the number of finishing steps required. It is commonly used in metalworking, fabrication, and production grinding environments by machinists, fabricators, and automated-system operators.

Key Features

• Microreplication technology forms aluminum oxide mineral into uniform pyramids for consistent cut and finish
• Self-sharpening pyramid structure exposes fresh mineral as it wears, maintaining cut rate throughout belt life
• Runs cooler than conventional abrasives, reducing heat buildup on workpiece surfaces
• Flexible X-weight cloth backing conforms to contoured and complex surfaces
• Produces finer finishes than conventional electrostatically coated abrasive belts
• Three-dimensional abrasive design supports repeatable, consistent finishes in robotic and automated applications

Compatibility

Designed for use on belt finishing and polishing machines that accept 60-inch by 1-inch abrasive belts; suitable for metalworking applications requiring intermediate finishing and fine polishing prior to plating or buffing.

Installation Notes

Installation should be performed by qualified machine operators following equipment manufacturer guidelines for belt tracking and tension. Power down and lock out the machine before mounting or removing the belt. Inspect the belt for tears or damage before each use and ensure the drive and idler rollers are clean and properly aligned to prevent premature belt failure.

Technical Specifications

• Abrasive Mineral: Aluminum Oxide
• Abrasive Type: Microreplication (Trizact)
• Backing Material: X-Weight Cloth
• Belt Length: 60 inches
• Belt Width: 1 inch
• Color: Gray
• Unit of Measure: Each
• Weight: 0.11 pounds

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010360151