3M 7010329662 Scotch-brite Hs-dc Non-woven Disc 6 in

Product Description

The 3M 7010329662 Scotch-Brite HS-DC High Strength Disc is a non-woven abrasive disc built for general-purpose surface conditioning on metal. The open-web construction resists loading and runs cool, which keeps the aluminum oxide abrasive cutting at a consistent rate from the first use to the last. At 6 inches in diameter with a 5/8 inch arbor hole, the disc mounts directly to right-angle grinders and disc sanders used in fabrication, maintenance, and finishing operations. Machinists, fabricators, and maintenance technicians rely on this disc to deburr, denib, defuzz, and achieve repeatable satin finishes without gouging the base material.

This disc is suited for light to heavy-duty surface conditioning on ferrous and non-ferrous metals in both shop and field environments. Typical applications include weld cleanup, edge deburring after cutting or punching, pre-paint surface prep, and satin finishing on stainless steel or aluminum. The conformable disc body follows contours and irregular surfaces, and the wear-resistant edge supports consistent finish results across the full service life of the disc. Multiple discs can be stacked on the arbor to cover larger surface areas or to increase aggressiveness when needed.

Key Features

• Non-woven open-web construction resists loading and runs cool for consistent cut rate
• Aluminum oxide abrasive grain suited for deburring, denibing, defuzzing, and satin finishing on metal
• 6 inch diameter with 5/8 inch arbor for direct mounting to standard right-angle grinders and disc sanders
• Conformable disc body with wear-resistant edge delivers consistent finishes and extended disc life
• Stackable design allows expanded coverage or increased aggressiveness on larger surface areas
• Durable, tough non-woven web supports heavy-duty use across a wide range of metals

Compatibility

Designed for use on right-angle grinders and disc sanders that accept a 6 inch disc with a 5/8 inch arbor. Suitable for use on ferrous and non-ferrous metals including steel, stainless steel, and aluminum.

Installation Notes

Mounting and disc changes should be performed by a qualified operator with the tool unplugged or the air supply disconnected. Verify the tool RPM rating meets or exceeds the maximum rated speed of the disc before mounting. Wear appropriate PPE including eye protection and gloves during disc changes and operation. Inspect the disc for damage before each use and do not use a disc that shows tears, fraying, or unusual wear.

Technical Specifications

• Disc Diameter: 6 inches
• Arbor Size: 5/8 inch
• Abrasive Material: Aluminum Oxide
• Construction: Non-Woven Open Web
• Weight: 0.17 pounds
• UOM: Each
• UPC: 00048011936420

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010329662