3M 7010328995 Scotch-brite Clean and Strip Disc 3 Inch

Product Description

The 3M 7010328995 is a Scotch-Brite CS-DC Clean and Strip Disc engineered for aggressive surface preparation in metalworking applications. Built from a non-woven silicon carbide web in an extra coarse (XCS) grade, this 3-inch disc cuts sharply through paint, rust, coatings, and corrosion without loading up or overheating. The smear-resistant, load-resistant construction maintains consistent cutting action throughout the life of the disc. At 0.05 pounds per disc, it is lightweight and suited for high-cycle use. Fabricators, welders, and metal finishing technicians typically reach for this disc during paint prep, coating removal, and pre-weld surface cleaning.

This disc is designed for use on metal surfaces where coating removal, rust stripping, and surface prep are required before painting, plating, or welding. Its thin profile allows access to tight corners and contoured areas that wire brushes and flap discs cannot reach effectively. It delivers greater surface contact than wire brushes, making it a practical choice for cleaning irregular or detailed workpiece geometry in both production and maintenance environments.

Key Features

• Extra coarse silicon carbide grain aggressively removes paint, rust, and coatings
• Non-woven web construction resists loading and heat buildup for extended disc life
• Smear-resistant material ensures uniform wear throughout use
• Thin disc profile reaches tight corners and contoured surfaces
• Preserves workpiece geometry during stripping and prep work
• Greater surface coverage compared to wire brushes

Compatibility

Designed for use on metal substrates requiring paint, rust, or coating removal prior to surface finishing. Intended for use with compatible right-angle grinders and disc holders that accept 3-inch clean and strip discs.

Installation Notes

Installation and use of abrasive discs of this type is typically performed by metal fabricators, welders, or maintenance technicians. Verify that the disc is mounted securely on a compatible right-angle grinder or die grinder with the correct arbor size before operation. Always wear appropriate personal protective equipment including eye protection and gloves. Follow the tool manufacturer's rated RPM guidelines to prevent disc failure during operation.

Technical Specifications

• Disc Diameter: 3 inches
• Abrasive Material: Silicon Carbide
• Grade: Extra Coarse (XCS)
• Construction: Non-Woven
• Weight: 0.05 pounds
• UOM: Each

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010328995