3M 7010327726 Abrasive Belt 80 Grit 132x4 Inch Ceramic

Product Description

The 3M 7010327726 is a coated abrasive belt engineered for aggressive surface finishing on metals. Built on a Y-weight polyester cloth backing, it uses 3M precision-shaped ceramic grain bonded with a heat-resistant resin system. The result is a belt that cuts fast, runs cool, and leaves consistent finishes without discoloring the workpiece. Rated at 80 grit, it is suited for stock removal and intermediate finishing in both wet and dry operations. The belt measures 132 inches in length and 4 inches in width, fitting wide-format belt grinders and finishing machines common in fabrication and metalworking shops. Installers and operators in metal fabrication, aerospace, and industrial maintenance will find this belt appropriate for demanding material removal tasks.

This belt is designed for use on stainless steel, titanium, and high-nickel alloys where heat buildup and discoloration are primary concerns. The water-resistant polyester backing allows operation with liquid lubricants or coolants, making it suitable for both dry grinding lines and wet finishing setups. Typical applications include weld blending, surface conditioning, and deburring on plate, pipe, and structural metal components in fabrication and manufacturing environments.

Key Features

• Precision-shaped ceramic abrasive grain delivers high cut rate and extended belt life
• Y-weight polyester cloth backing provides toughness and flexibility for aggressive sanding
• Water-resistant backing supports use with liquid lubricants and coolants
• Heat-resistant resin bond minimizes workpiece discoloration on stainless steel, titanium, and high-nickel alloys
• Effective in both wet and dry finishing applications
• 80 grit rating balances aggressive stock removal with surface finish quality

Compatibility

Designed for wide-format belt grinders and finishing machines that accept a 132-inch by 4-inch abrasive belt. Suitable for use on stainless steel, titanium, and high-nickel alloy workpieces in fabrication, aerospace, and industrial maintenance applications.

Installation Notes

Belt installation should be performed by a qualified machine operator following the equipment manufacturer's tracking and tensioning procedures. Confirm the machine is fully de-energized and locked out before mounting or removing the belt. Inspect the belt for tears or edge damage before use, and verify the arrow on the belt back aligns with the direction of travel on the drive wheel. Eye protection, hearing protection, and appropriate respiratory PPE should be worn during operation in accordance with applicable workplace safety standards.

Technical Specifications

• Grit: 80
• Belt Length: 132 inches
• Belt Width: 4 inches
• Abrasive Type: Precision-shaped ceramic grain
• Backing Material: Y-weight water-resistant polyester cloth
• Bond Type: Heat-resistant resin
• Application: Wet or dry
• Weight: 1.13 pounds
• UPC: 00051119781052

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010327726