3M 7010327067 Flap Disc 60 Grit 7 Inch Cubitron Ii 967A

Product Description

The 3M 7010327067 is the Cubitron II 967A flap disc, a 7-inch, 60-grit abrasive designed for right-angle grinder use in medium-pressure grinding and surface preparation applications. Built around 3M Precision-Shaped Grain, the disc delivers a fast, consistent cut while resisting the gouging common with bonded wheels and fiber discs. Individual flaps wear progressively, exposing fresh abrasive mineral throughout the disc life. At 0.72 pounds, the disc is sized for single-handed grinder use on flat and contoured workpieces. Fabricators, welders, and metalworking shops will find this disc well-suited to weld leveling, light deburring, and pre-paint surface prep.

This flap disc targets medium-duty metal fabrication work, including weld removal and surface conditioning on mild steel and stainless steel. Its poly-cotton backing provides controlled, even wear under medium unit pressure, making it appropriate for both flat grinding passes and work on contoured surfaces. Stainless steel applications benefit from the disc's finish quality and resistance to gouging, which helps maintain surface integrity before finishing or coating operations. Installed on a standard 7-inch right-angle grinder by welders, fabricators, and industrial maintenance technicians.

Key Features

• 3M Precision-Shaped Grain delivers fast stock removal and extended disc life
• Progressive flap breakdown continuously exposes fresh abrasive for a consistent cut rate
• Poly-cotton backing supports controlled, even wear under medium unit pressure
• Less gouging than fiber discs and bonded abrasive wheels, preserving surface integrity
• Suited for weld leveling, light deburring, and pre-paint surface preparation
• Performs on both flat and contoured workpiece surfaces

Compatibility

Designed for use on standard 7-inch right-angle grinders; suitable for medium-pressure grinding on mild steel and stainless steel workpieces.

Installation Notes

Mounting and disc changes must be performed with the grinder fully powered off and unplugged or locked out per applicable safety procedures. Verify that the grinder's rated RPM meets or exceeds the disc's maximum operating speed before mounting. Use the correct hub or backing pad for the disc arbor size, and inspect the disc for damage before each use. Worn or damaged discs must be removed from service immediately.

Technical Specifications

• Disc Diameter: 7 inches
• Grit: 60
• Disc Type: Right Angle Flap Disc
• Abrasive: Precision-Shaped Grain
• Backing Material: Poly-cotton
• Weight: 0.72 pounds
• UPC: 00051141556543
• Unit of Measure: Each

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010327067