3M 7010326453 Psa Disc 220 Grit 5 in Silicon Carbide 175pk

Product Description

The 3M 7010326453 is a pressure-sensitive adhesive (PSA) abrasive disc designed for surface finishing and material removal in professional and trade applications. At 5 inches in diameter with a 220 grit Silicon Carbide abrasive, it delivers very fine cutting action suited for final sanding passes, prep work, and light stock removal. The disc features an A-weight paper backing that stays flexible during use, and includes 5 vacuum holes for dust extraction on compatible sanders. Each package contains 175 discs. Installers and finishing tradespeople working with wood, composites, or metal surfaces will find this disc a direct fit for high-cycle production environments.

This disc is intended for use with random orbital sanders that accept 5-inch PSA-mount abrasives. The 220 grit Silicon Carbide abrasive is well-suited for finish sanding on wood, plastic, and light metal surfaces where a fine, uniform scratch pattern is required. The gray-colored disc and flexible paper backing allow it to conform to slightly contoured surfaces. Vacuum hole placement supports effective dust management when the sander is connected to a dust collection system, keeping the work area cleaner and extending disc life.

Key Features

• 220 grit Silicon Carbide abrasive for very fine surface finishing
• 5-inch disc diameter with PSA backing for quick, tool-free mounting
• A-weight paper backing provides flexibility for contoured surfaces
• 5 vacuum holes support dust extraction on compatible orbital sanders
• 175 discs per package for high-volume production use
• Designed for compatibility with random orbital sanders

Compatibility

Designed for use with random orbital sanders that accept 5-inch PSA-mount abrasive discs with a 5-hole vacuum pattern.

Installation Notes

PSA discs are installed by aligning the vacuum holes with the sander pad holes and pressing the adhesive side firmly onto the pad. Power down or disconnect the sander before mounting or removing a disc. Avoid folding or creasing the disc before application, as this can compromise the adhesive bond. Remove and replace discs when loading, glazing, or visible wear reduces cutting efficiency.