3M 7010326390 Abrasive Belt P100 Grit 75x36 Inch Ao Cloth

Product Description

The 3M 7010326390 is a coated abrasive cloth belt designed for aggressive stock removal on wood and metal surfaces. Built on a heavyweight cloth backing with open coat construction, this belt carries P100 grit aluminum oxide abrasive bonded with a resin system rated for high heat and high pressure. At 75 inches long and 36 inches wide, it fits wide belt sanding machines common in production woodworking and metal fabrication shops. The open coat layout resists loading, and the washable backing allows repeated use on resinous or high-loading substrates such as pine. Licensed tradespeople and production floor operators are the typical end users.

This belt is sized for wide belt sanding applications and is also suitable for edge sanding and portable belt sanding setups where a 75-inch by 36-inch belt is specified. It performs on bare wood, engineered wood composites, ferrous and non-ferrous metals, and similar materials requiring consistent, fast stock removal. The P100 grit designation makes it appropriate for intermediate-stage sanding where surface finish and removal rate must be balanced. Production environments with high duty cycles benefit from the resin bond and heavyweight backing combination.

Key Features

• P100 grit aluminum oxide abrasive delivers increased cut rate and extended abrasive life
• Open coat construction resists loading on wood, including resinous species such as pine
• Heavyweight cloth backing handles high-production, high-pressure sanding applications
• Washable backing allows repeated use and extends belt service life on high-loading substrates
• Resin bond withstands high heat and pressure for longer overall service life

Compatibility

Designed for use on wide belt sanding machines, edge sanders, and portable belt sanders that accept a 75-inch by 36-inch abrasive belt. Suitable for sanding operations on wood and metal workpieces.

Installation Notes

Belt installation should be performed by qualified machine operators following the sander manufacturer's tensioning and tracking procedures. Disengage and lock out the machine from its power source before changing belts. Inspect the belt for tears or edge damage before mounting, and confirm belt travel direction matches the arrow marked on the belt backing if present. Follow applicable OSHA and equipment manufacturer guidelines for abrasive belt operation and guarding.

Technical Specifications

• Grit: P100
• Abrasive Material: Aluminum Oxide (AO)
• Backing Material: Cloth
• Coat Type: Open Coat
• Bond Type: Resin
• Belt Length: 75 inches
• Belt Width: 36 inches
• Weight: 3.16 pounds
• Unit of Measure: Each
• Minimum Order Quantity: 5
• UPC: 00051115666476

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010326390