3M 7010326154 Abrasive Belt 60 Grit 2x36 in Aluminum Oxide

Product Description

The 3M 7010326154 is a coated abrasive belt from the 341D series, designed for dry grinding, blending, and stock removal on metal, wood, and composite surfaces. It measures 2 inches wide by 36 inches long and cuts at 60 grit, a medium grade well suited to aggressive material removal without excessive surface damage. The aluminum oxide abrasive grain is bonded to a heavy-duty X-weight cloth backing with a closed coat density, giving the belt durability under sustained pressure and heat. Machinists, fabricators, and metalworkers typically run this belt on stationary or portable belt grinders and sanders in shop environments.

This belt is a standard fit for 2 inch by 36 inch belt grinder and sander platforms used in metal fabrication shops, maintenance and repair operations, and woodworking facilities. The 60 grit medium grade makes it a practical choice for initial weld blending, deburring, edge chamfering, and surface preparation ahead of finer finishing passes. It is intended for dry operation only and is not rated for wet or coolant-flooded grinding applications.

Key Features

• 60 grit medium grade aluminum oxide abrasive for efficient stock removal
• 2 inches wide by 36 inches long — standard belt grinder size
• Closed coat construction maximizes abrasive coverage for aggressive cutting action
• X-weight cloth backing resists tearing and flexing under load
• Dry operation rating — suitable for metal, wood, and composite substrates
• 341D series coated abrasive construction for consistent grain adhesion and belt life

Compatibility

Designed for use on belt grinders and belt sanders that accept a 2 inch by 36 inch abrasive belt in dry operation configurations.

Installation Notes

Belt installation and replacement should be performed by qualified shop personnel with the grinder or sander powered off and unplugged. Verify belt tracking alignment and tension before resuming operation. Inspect the belt for tears, delamination, or grain loading before each use and replace if any defects are found. Always use appropriate eye protection and guarding per applicable OSHA and machine manufacturer requirements when operating belt grinding equipment.