3M 7010310162 Convolute Finishing Wheel 6 Inch Ao

Product Description

The 3M 7010310162 is a dense, stiff convolute abrasive finishing wheel built for final finishing work on a variety of metal surfaces. The wheel measures 6 inches in diameter and is constructed with an aluminum oxide (AO) abrasive in an open-web convolute format. That rigid construction delivers consistent pressure across flat surfaces and into corners, making it well suited for satin and antique finish applications. The high cut rate of the wheel requires only light contact pressure, reducing operator fatigue and material removal overshoot. Weighing 2.36 pounds, it is compatible with standard bench grinder and arbor setups used by metalworkers and finishing technicians.

This convolute finishing wheel is intended for metal finishing applications in fabrication shops, maintenance facilities, and production environments. It performs on ferrous and non-ferrous metals where a consistent surface finish is required prior to coating, plating, or final assembly. The open-web construction resists loading from fine metal particles, extending the usable service life of the wheel compared to denser alternatives. It can also be dressed to conform to specific part geometry, adding versatility for contoured or irregular workpieces.

Key Features

• Dense, rigid convolute wheel construction performs well on flat surfaces and inside corners
• Aluminum oxide abrasive produces satin and antique finishes on a range of metals
• High cut rate at low contact pressure reduces operator effort and minimizes overcut risk
• Open-web design resists loading and prolongs abrasive service life
• Can be dressed to fit specific part geometry for contoured workpieces
• 6-inch diameter fits standard bench grinder and arbor configurations

Compatibility

Designed as a convolute finishing wheel for use on a variety of ferrous and non-ferrous metals including steel, aluminum, and similar materials where a final satin or antique surface finish is required.

Installation Notes

Installation should be performed by a qualified operator familiar with bench grinder and abrasive wheel safety per ANSI B7.1 standards. Always power down and disconnect the grinder before mounting or removing the wheel. Verify that the grinder RPM rating meets or exceeds the maximum RPM marked on the wheel, and confirm proper guard placement before operation. Inspect the wheel for cracks or damage before each use and do not exceed the rated operating speed.