3M 7010310116 Non-woven Buff and Blend Hs Disc 10 Inch

Product Description

The 3M 7010310116 is a high-strength non-woven nylon abrasive disc engineered for light deburring, surface cleaning, and final finishing on metal workpieces. Built on a dense, open-web nylon construction, the disc resists folding under pressure and holds its form through edgework and irregular surface profiles. Aluminum oxide mineral provides sharp, consistent cutting action and produces a uniform scratch pattern on both ferrous and non-ferrous metals. At 10 inches in diameter with a 7/8-inch arbor hole, this disc is sized for medium to large grinder and finishing machine applications. Installers and fabricators in HVAC, plumbing, and light industrial trades reach for this disc when a clean, smear-free final finish is required before assembly or coating.

This disc is suited for metal surface preparation tasks in trade and light industrial environments. Typical applications include removing burrs left by cutting or drilling, cleaning oxide scale from pipe fittings or sheet metal, and preparing surfaces for welding or coating. The open web construction resists loading, which extends service life in applications where debris buildup would otherwise clog a conventional abrasive. The disc is sold individually and is available in Coarse, Medium, and Very Fine grades to match the required level of aggressiveness and surface finish.

Key Features

• High-strength non-woven nylon construction resists tearing, fraying, and folding under pressure
• Aluminum oxide mineral delivers sharp cutting action and a consistent scratch pattern on ferrous and non-ferrous metals
• Open web design is load resistant, reducing debris buildup and extending disc service life
• Produces a uniform, smear-free finish suitable for final finishing and pre-coating surface prep
• Available in three grades: Coarse, Medium, and Very Fine for varying degrees of aggressiveness
• 10-inch diameter with 7/8-inch arbor hole fits a wide range of medium to large finishing machines

Compatibility

Designed for use on ferrous and non-ferrous metals with grinders and finishing machines accepting a 10-inch disc and 7/8-inch arbor. Confirm machine speed rating and arbor compatibility before installation.

Installation Notes

This disc should be mounted by a qualified operator familiar with angle grinder and disc finishing equipment. Power down and disconnect the machine before mounting or removing the disc. Verify that the machine's rated speed meets or exceeds the disc's maximum operating speed before use. Follow applicable workplace safety standards and wear appropriate eye and face protection during operation.

Technical Specifications

• Disc Diameter: 10 inches
• Arbor Size: 7/8 inch
• Abrasive Type: Non-Woven Nylon
• Mineral: Aluminum Oxide
• Construction: Open Web, High Strength
• Unit of Measure: Each
• Minimum Order Quantity: 50
• Weight: 7 pounds
• Package Length: 15 inches
• Package Width: 15 inches
• Package Height: 12 inches

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010310116