3M 7010309628 Abrasive Belt 2x60 in Aluminum Oxide Medium

Product Description

The 3M 7010309628 is a non-woven abrasive belt designed for surface finishing, blending, and light material removal in professional shop and field applications. Measuring 2 inches wide by 60 inches long, it runs on standard belt sanders and finishing machines that accept that belt size. The abrasive material is aluminum oxide, a durable, self-fracturing grain well suited to ferrous and non-ferrous metals, composites, and painted surfaces. The medium grade strikes a balance between cut rate and surface finish, making it a practical choice for general prep work and conditioning tasks. The non-woven construction conforms to irregular surfaces and reduces loading compared to coated abrasive belts.

This belt is used in metal fabrication shops, HVAC duct and equipment prep, plumbing pipe surface conditioning, and general industrial maintenance. Non-woven belts of this type are commonly used where a consistent, uniform scratch pattern is needed without aggressive stock removal. The SC-BS series uses a scrim backing for dimensional stability during both wet and dry operation, allowing use with water-based or oil-based cutting fluids as the job requires.

Key Features

• Aluminum oxide abrasive grain for durable, consistent cutting action on metal and composite surfaces
• Medium grade for general surface blending, conditioning, and prep work
• Non-woven construction conforms to contoured and irregular surfaces while resisting loading
• Scrim backing provides dimensional stability and resistance to tearing under load
• Rated for both wet and dry operation, compatible with water-based or oil-based fluids
• 2 inches wide by 60 inches long, fits standard belt finishing machines accepting that belt size

Compatibility

Designed for use on belt sanders and finishing machines that accept a 2-inch by 60-inch non-woven abrasive belt. Suitable for wet or dry operation as specified by the equipment manufacturer.

Installation Notes

Install this belt only on equipment rated for the 2-inch by 60-inch belt size and capable of operating with non-woven abrasive media. Confirm the machine is powered down and unplugged before changing the belt. Inspect the tracking adjustment and tension mechanism before powering on to prevent belt walk or premature failure. When using with cutting fluids, verify the machine is rated for wet operation.