3M 7010299044 Abrasive Belt 132x2 Inch 36 Grit Alumina Zirconia

Product Description

The 3M 7010299044 is an alumina zirconia coated abrasive belt designed for high-pressure grinding, deburring, and edge work on metal and other substrates. Measuring 132 inches in length and 2 inches in width with a 36-grit cut, this belt uses an alumina zirconia mineral with a grinding aid to deliver faster stock removal than standard aluminum oxide abrasives. The heavyweight polyester cloth backing is water-resistant and built to withstand the mechanical stress of high-production operations. It is installed on stationary or portable belt grinders and is well suited for fabrication shops, weld prep, and metal finishing applications handled by skilled trade professionals.

This abrasive belt is intended for use on metal substrates including aluminum, stainless steel, and carbon steel where heat buildup is a concern. The alumina zirconia grain runs cooler than conventional aluminum oxide, making it appropriate for heat-sensitive materials. The heavy polyester backing holds up under edge grinding and contour work, reducing belt failure caused by backing tears or delamination during extended production runs.

Key Features

• Alumina zirconia grain with grinding aid delivers higher cutting efficiency than aluminum oxide abrasives
• Runs cooler than conventional abrasives, reducing heat damage on aluminum and stainless steel
• Heavyweight, water-resistant polyester cloth backing withstands high-pressure and edge grinding applications
• 36 grit provides aggressive stock removal for weld prep and surface conditioning
• 132 inch length suits a range of industrial belt grinder configurations

Compatibility

Designed as a replacement coated abrasive belt for industrial belt grinders accepting a 132-inch by 2-inch belt configuration.

Installation Notes

Belt installation and replacement should be performed by a qualified operator with the grinder fully powered down and unplugged or locked out per applicable OSHA lockout/tagout procedures. Confirm the belt tracking adjustment and tension setting before resuming operation. Inspect the belt for tears, fraying, or delamination before each use and replace immediately if damage is found.

Technical Specifications

• Belt Length: 132 inches
• Belt Width: 2 inches
• Grit: 36
• Abrasive Mineral: Alumina Zirconia
• Backing Material: Polyester Cloth
• Coating Type: Coated
• Weight: 0.86 pounds

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010299044