3M 7010290127 Fine Line Tape 215 Blue 0.25in X 60yd 4.8 Mil

Product Description

The 3M 7010290127 is a blue, film-backed fine line masking tape designed to produce clean, sharp paint lines on contoured and irregular surfaces. At 4.8 mil total thickness, it lays flat against complex shapes without lifting at corners or in recessed areas. The low-profile backing tapes smoothly over freshly cured acrylic lacquer, enamel, and polyurethane finishes, delivering precise color line separation. This tape is rated for use up to 250 degrees F, making it suitable for applications that involve elevated temperature exposure during finishing processes. Auto body technicians, painters, and finishing professionals use this tape when standard masking tape will not conform to the surface geometry required.

Fine Line Tape 215 is used in automotive refinishing, industrial coating, and custom paint applications where tight radius curves and deep contours make conventional masking tape impractical. Each roll measures 0.25 inches wide by 60 yards long, sized for detail work and striping. The tape is intended for indoor finishing environments and should not be used in outdoor or prolonged UV-exposure applications. It is sold by the roll with a minimum order quantity of 144 rolls.

Key Features

• Low-profile film backing conforms to contoured and irregular surfaces without lifting
• Rated for use up to 250 degrees F, suitable for baked-finish and high-temperature paint environments
• Adhesion to steel of 42 oz. per inch of width for reliable hold during masking
• Tensile strength of 10 lbs. per inch of width with 830 percent elongation at break for flexibility on complex shapes
• Smooth backing allows application directly over cured acrylic lacquer, enamel, and polyurethane finishes
• 0.25 inch width designed for fine detail masking, striping, and color separation lines

Compatibility

Designed for use over cured acrylic lacquer, enamel, and polyurethane paint systems in automotive refinishing and industrial finishing applications. Not intended for outdoor use or prolonged UV exposure.

Installation Notes

This tape is applied by hand and requires no special tools beyond a tape dispenser or blade for clean cuts. Ensure the substrate surface is fully cured and clean before application. Remove the tape promptly after painting, before the finish fully hardens, to reduce the risk of edge chipping. Do not use in outdoor environments or subject to weathering conditions.

Technical Specifications

• Thickness: 4.7 mil
• Width: 0.25 inches
• Length: 60 yards per roll
• Adhesion to Steel: 42 oz. per inch of width
• Tensile Strength: 10 lbs. per inch of width
• Elongation at Break: 830 percent
• Maximum Use Temperature: 250 degrees F
• Color: Blue
• Weight: 0.1 pounds
• Unit of Measure: Roll
• UPC: 00021200608315

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010290127