3M 7000144625 Mixing Nozzles Applicator 400A-2K 36pk

Product Description

The 3M 7000144625 is a replacement mixing nozzle designed for use with the 3M Two-Component Adhesive Sealant Applicator 400A-2K. These nozzles facilitate the precise blending and dispensing of two-part adhesive and sealant compounds at the point of application. Each nozzle mixes the two components internally as the material is dispensed, ensuring a consistent mix ratio without manual blending. They are sold as a case of 36 nozzles, making them practical for high-volume applications or job sites where frequent nozzle changes are required. Adhesive applicator nozzles of this type are typically used by assembly technicians, automotive service professionals, and industrial maintenance crews.

These nozzles are intended for use with the 3M 400A-2K two-component applicator platform, which is commonly deployed in automotive, aerospace, manufacturing, and general industrial assembly environments. The 400A-2K applicator accepts cartridge-based two-part adhesive and sealant systems, and the nozzle ensures proper static mixing of both components before dispensing. Each nozzle is a single-use consumable and should be replaced between applications or when the adhesive begins to cure inside the tip.

Key Features

• Designed specifically for the 3M Two-Component Adhesive Sealant Applicator 400A-2K
• Static mixing design blends two-part compounds internally during dispensing
• Case of 36 nozzles supports continuous workflow without repeated reordering
• Single-use consumable prevents cross-contamination between applications
• Lightweight construction at 0.04 pounds per unit

Compatibility

Designed for use with the 3M Two-Component Adhesive Sealant Applicator 400A-2K. Confirm nozzle geometry and cartridge ratio against the specific adhesive cartridge in use before installation.

Installation Notes

Attach the nozzle to the 400A-2K applicator cartridge before dispensing and verify it is fully seated and locked before applying pressure. Replace the nozzle after each use or if the mixed adhesive begins to cure inside the tip, as a clogged nozzle can cause uneven mix ratios and poor bond performance. Do not attempt to clean and reuse static mixing nozzles, as residual cured material compromises mixing integrity. Disposal should follow applicable local regulations for adhesive waste.

Technical Specifications

• Weight: 0.04 pounds
• Unit of Measure: Each
• Minimum Order Quantity: 36
• UPC: 00051115644221

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7000144625