3M 7000133610 FP301 Heat Shrink Tubing 3/4 in 48 in Clear 50pc

Product Description

The 3M 7000133610 is a clear, thin-wall heat shrink tubing from the FP-301 series, sold in a pack of 50 pieces at 48 inches per piece. FP-301 tubing is a general-purpose polyolefin product engineered to provide a reliable balance of electrical insulation, physical protection, and chemical resistance. It is used across a broad range of industrial and military-specification wiring applications. Electricians, harness builders, and field service technicians apply this tubing over wire splices, terminals, and conductor bundles to protect against abrasion, moisture, and short circuits. The tubing shrinks uniformly when heat is applied, conforming tightly to the underlying component.

This tubing is suited for both industrial and military wiring environments where a dependable, low-profile insulation sleeve is required. The clear material allows visual inspection of the covered splice or conductor after installation without removing the sleeve. At 48 inches per piece and a nominal 3/4 inch diameter, each section can be cut to length on the job, reducing waste and accommodating a variety of conductor and connector sizes commonly found in panel work, equipment harnesses, and field repairs.

Key Features

• FP-301 series thin-wall polyolefin construction provides electrical insulation and chemical resistance
• Clear tubing allows post-installation visual inspection of covered connections
• 48 inches per piece allows on-site cut-to-length flexibility
• Pack of 50 pieces suits volume wiring work and service truck stocking
• General-purpose rating covers a wide range of industrial and military wiring applications

Compatibility

Designed for general-purpose use on wire splices, terminals, and conductor bundles in industrial and military wiring applications where a 3/4 inch nominal thin-wall heat shrink sleeve is required.

Installation Notes

Installation is typically performed by licensed electricians or trained wiring technicians following applicable NEC guidelines. De-energize all circuits before applying heat shrink tubing to any splice or terminal. Use a calibrated heat gun rather than an open flame to achieve uniform shrinkage and avoid damaging the tubing or underlying conductors. Cut tubing to the required length before sliding it over the connection, and ensure full coverage of the splice or terminal before applying heat.

Technical Specifications

• Series: FP-301
• Wall Type: Thin-Wall
• Nominal Diameter: 3/4 inch
• Length per Piece: 48 inches
• Color: Clear
• Quantity: 50 pieces
• Weight: 0.1 pounds
• UPC: 10051128598556

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7000133610