3M 7000132166 Corrosion Protection Tape 2in X 100ft

Product Description

The 3M 7000132166 is a printed, general-purpose corrosion protection tape rated at 10 mil thickness. It is designed for use on underground and exposed metal surfaces where moisture, soil, and environmental exposure cause corrosion over time. The tape carries UV resistance and a temperature rating of 176 degrees F (80 degrees C), making it suitable for a range of field conditions. It also delivers good abrasion resistance for installations where tape may contact backfill, rough conduit edges, or adjacent hardware. Licensed electricians, pipefitters, and plumbers typically apply this product during new installations or repair work on piping and conduit systems.

This tape is intended for corrosion protection on conduits, fittings, and joints. It is a general-purpose solution suited to both residential and commercial applications where exposed or buried metal components require a durable protective wrap. The product name and thickness are printed directly on the tape for easy field identification during installation. Per manufacturer guidance, 3M Scotchrap Pipe Primer should be used in conjunction with this tape and all other corrosion protection tapes to promote proper adhesion and performance.

Key Features

• 10 mil thickness printed on tape for quick field verification
• UV resistant for above-ground and exposed outdoor applications
• Temperature rated to 176 degrees F (80 degrees C)
• Good abrasion resistance suited to conduit and pipe wrap in rough environments
• General-purpose corrosion protection for conduits, fittings, and joints

Compatibility

Designed as a general-purpose corrosion protection wrap for metal conduits, pipe fittings, and joints in electrical and plumbing applications. For best results, use with 3M Scotchrap Pipe Primer as recommended by the manufacturer.

Installation Notes

Apply this tape only after the surface has been cleaned and primed with the appropriate pipe primer per manufacturer instructions. Power down or de-energize any associated electrical systems before wrapping conduit. Wrap should be applied with consistent tension and overlap to avoid gaps that allow moisture intrusion. Follow applicable NEC and local code requirements for conduit protection in underground or exposed installations.

Technical Specifications

• Thickness: 10 mil
• Width: 2 inches
• Length: 100 ft
• Temperature Rating: 176 degrees F (80 degrees C)
• UV Resistant: Yes
• Weight: 1.15 pounds
• Unit of Measure: Roll
• UPC: 00054007090656

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7000132166