3M 7000126056 Safety Walk Tread 2 Inches X 60 Ft White

Product Description

The 3M 7000126056 is a light-duty resilient anti-slip tread roll designed to reduce the risk of slips and falls on walking surfaces. Measuring 2 inches wide by 60 feet long, this white roll provides a continuous strip of slip-resistant material that can be cut to the lengths needed for a given installation. It is suited for light-traffic areas such as steps, ramps, walkways, and thresholds in commercial, institutional, and residential settings. Facility maintenance technicians and safety compliance professionals are the primary installers. The white finish blends with light-colored flooring and meets common aesthetic requirements for indoor safety applications.

This tread roll is intended for light-duty use on smooth, clean, and dry surfaces where slip hazards exist. Typical applications include interior stair nosings, low-traffic hallways, office entryways, and similar pedestrian surfaces. The 60-foot roll length allows a single roll to cover multiple locations before a reorder is needed, making it efficient for facilities with numerous small installations. It is not intended for heavy industrial floors, wet immersion environments, or surfaces subject to heavy rolling loads.

Key Features

• Continuous 60-foot roll allows flexible cut-to-length installation across multiple locations
• 2-inch width suits stair edges, thresholds, and narrow walkway borders
• White color supports visibility requirements and aesthetic consistency in light-colored environments
• Light-duty resilient construction designed for low-to-moderate foot traffic surfaces
• Pressure-sensitive adhesive backing for direct surface application without mechanical fasteners

Compatibility

Designed as a light-duty slip-resistant surface treatment for clean, smooth interior walking surfaces including steps, ramps, and thresholds in residential and light commercial environments.

Installation Notes

Surface must be clean, dry, and free of oils, waxes, or loose coatings before application. Cut the tread to the required length using a sharp utility knife and straightedge. Apply firm pressure across the full surface of the strip to ensure full adhesive contact. Allow adequate dwell time before the surface is returned to service, following the adhesive manufacturer guidance for the ambient temperature at the time of installation.

Technical Specifications

• Width: 2 inches
• Length: 60 ft
• Color: White
• Duty Rating: Light Duty
• Material Type: Resilient Tread
• Weight: 0.03 pounds
• UPC: 00051131595033

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7000126056