3M 7000124882 Masking Tape 36mm 60yd 4.4mil Tan

Product Description

The 3M 7000124882 is a general-purpose paper masking tape designed for light- and medium-duty bundling, holding, paint masking, and sealing applications. The tape measures 36 mm (approximately 1.42 inches) wide and 60 yards long, with a total thickness of 4.4 mil. A rubber adhesive backing provides reliable tack on a range of surfaces. Maximum operating temperature reaches 200 degrees F (93.33 degrees C), making it suitable for standard spray and brush painting operations where moderate heat exposure may occur. Trade professionals and facility maintenance staff will find this tape straightforward to apply and remove without leaving adhesive residue under normal use conditions.

This tape is commonly used in painting preparation, light assembly, bundling of components, and temporary holding tasks across residential, commercial, and light industrial settings. It is appropriate for use on surfaces that require clean tape removal after masking. The 60-yard roll length reduces the frequency of roll changes during large jobs, and the tan paper backing tears cleanly by hand, supporting fast application on the work site.

Key Features

• Rubber adhesive provides reliable tack for paint masking and bundling
• 4.4 mil total thickness offers durability for light- and medium-duty tasks
• Maximum operating temperature of 200 degrees F (93.33 degrees C)
• Tensile strength of 19 lb per inch for controlled, consistent tearing
• 60-yard roll length reduces mid-job roll changes
• Tan paper backing tears cleanly by hand without tools

Compatibility

Designed as a general-purpose masking tape suited for standard paint masking, bundling, holding, and sealing tasks in light- and medium-duty applications.

Installation Notes

Apply to clean, dry surfaces free of dust, oil, or loose material for best adhesion. Remove the tape promptly after painting or masking work is complete to minimize adhesive transfer. Do not use on surfaces exposed to temperatures exceeding 200 degrees F. Surface preparation should follow applicable project or coating manufacturer guidelines.