3M 7000124031 Masking Tape 36mm 60yd 6.3mil Tan

Product Description

The 3M 7000124031 is a tan paper masking tape engineered for bundling, holding, and surface protection in industrial and trade applications. It features a rubber-based pressure-sensitive adhesive that bonds instantly on contact and measures 36 mm wide by 60 yards long at a 6.3 mil thickness. The tape delivers 27 lb per inch of tensile strength, making it reliable for moderate-duty securing tasks. It tears cleanly by hand, reducing the need for cutting tools on the job. HVAC technicians, painters, electricians, and general contractors use this tape for temporary masking, component bundling, and surface protection during fabrication or finishing work.

This tape is suited for residential and commercial job sites where a general-purpose masking tape is required. It performs in bundling wire harnesses, masking surfaces before coating or painting, and protecting finished components during handling and transport. The tape is rated for bake temperatures up to 250 degrees F for 30 minutes, making it appropriate for applications that involve low-temperature ovens or heat cure processes. It operates between 121 degrees F and 150 degrees F as a sustained service range. Typical users include HVAC installers, sheet metal fabricators, auto body technicians, and maintenance trades.

Key Features

• Rubber adhesive provides instant, pressure-sensitive bonding on contact
• Easy hand-tear paper backing speeds application without cutting tools
• 27 lb per inch tensile strength handles moderate bundling and holding loads
• Removes cleanly after bake cycle up to 250 degrees F for 30 minutes
• Transfer-resistant adhesive leaves minimal residue on most surfaces
• Meets A-A-883A, ASTM D-6123, and PPP-T-42C Type I standards

Compatibility

Designed as a general-purpose masking tape for bundling, holding, and surface protection tasks across industrial, HVAC, electrical, and construction applications. Note: removal from surfaces such as EPDM rubber moldings may be difficult; verify suitability before use on sensitive substrates.

Installation Notes

Clean and dry the target surface before applying to ensure full adhesive contact. Apply firm hand pressure along the tape length to activate the pressure-sensitive bond. When used in bake or heat-cure environments, do not exceed 250 degrees F for more than 30 minutes or adhesive residue may result. Remove tape promptly after the masking task is complete to reduce the risk of difficult removal.