3M 7000121417 Spray Adhesive 24 Oz Clear Series 94

Product Description

The 3M 7000121417 is a high-strength, high-tack spray adhesive in a 24 oz aerosol can, part of the 3M Series 94 line. It delivers a clear bond with a maximum operating temperature of 210 degrees F and covers up to 37 square feet per can. The adhesive has a maximum bonding time of 60 minutes, giving installers a workable open time before final placement. It is formulated for professional use across automotive, flooring, subfloor, and upholstery applications. Licensed tradespeople, fabricators, and installers working with multi-material assemblies will find it suited for bonding a broad range of substrates in demanding job-site conditions.

This adhesive is used in both residential and light commercial settings where fast, reliable bonds are needed across dissimilar materials. Typical applications include automotive interior work, carpet and flooring installation, subfloor preparation, and upholstery repair or fabrication. It bonds to cardboard, ceramic, cork board, fabric, fiberglass, foam, glass, leather, metal, paper, plastic, rubber, vinyl, and wood. The clear finish keeps bond lines invisible, which matters in finish-visible assemblies like upholstery and trim work.

Key Features

• High-tack, high-strength bond suitable for multi-substrate assemblies
• Maximum operating temperature of 210 degrees F for heat-exposed installations
• 37 square feet of coverage per 24 oz aerosol can
• Up to 60-minute maximum bonding time for precise part positioning
• Clear adhesive — bond lines remain invisible after application
• Low VOC content; Greenguard Certified and eligible to help contribute to LEED Credits

Compatibility

Bonds to cardboard, ceramic, cork board, fabric, fiberglass, foam, glass, leather, metal, paper, plastic, rubber, vinyl, and wood. Suitable for automotive, flooring, subfloor, and upholstery applications.

Installation Notes

Apply in a well-ventilated area — this product is flammable and must be kept away from open flames, sparks, and ignition sources during application and until fully dry. Surfaces should be clean, dry, and free of oils or loose material before spraying. Allow the adhesive to tack before joining substrates, following the open-time window for the specific materials being bonded. Comply with local and state VOC regulations, including California Air Resources Board and SCAQMD requirements where applicable.