3M 7000120585 Scotch-brite Convolute Deburring Wheel 12 Inch

Product Description

The 3M 7000120585 is a Scotch-Brite LD-WL convolute light deburring wheel designed for light deburring, polishing, and blending on metal, composite, and glass surfaces. Built with a soft, non-woven web construction, the wheel runs cool and requires less operator effort than harder wheel styles. At 12 inches in diameter and approximately 3.9 inches in face width, it fits bench grinders and arbor-mounted finishing setups common in fabrication and metalworking shops. A unique resin system minimizes smearing, which reduces prep time between operations and keeps the work surface clean.

This wheel suits light deburring and surface finishing applications in metal fabrication, HVAC duct work, plumbing component finishing, and general trade use where clean, polished edges are required. The convolute construction continuously exposes fresh abrasive mineral, delivering consistent results across the full surface of the wheel. It is well suited for removing fine burrs left by cutting, stamping, or machining operations without introducing excessive heat to the workpiece.

Key Features

• Soft convolute construction runs cool and reduces operator fatigue versus harder wheel types
• Non-woven web continuously exposes fresh abrasive mineral for consistent cut and finish
• Multi-purpose design cleans, finishes, blends, deburrs, and polishes metals, composites, and glass
• Unique resin system minimizes smearing, cutting clean-up and prep time between passes
• Conformable web adapts to workpiece contours for even finishing results
• 12 inch diameter suits standard bench grinder and arbor-mounted finishing equipment

Compatibility

Designed for use on metals, composites, and glass surfaces requiring light deburring, blending, or polishing; fits arbor-mounted finishing equipment accepting 12 inch convolute wheels.

Installation Notes

Mounting should be performed by a qualified operator following the equipment manufacturer's arbor and flange specifications. Ensure the grinder or finishing machine is fully de-energized and unplugged before mounting or removing the wheel. Verify the machine's rated RPM does not exceed the maximum operating speed marked on the wheel. Eye protection and appropriate PPE are required during operation per applicable ANSI safety standards.