3M 7000119267 Abrasive Disc Roll 5 Inch P800 Grit

Product Description

The 3M 7000119267 is a coated abrasive disc roll in the Stikit 216U series, designed for fast attachment to Stikit backup pads using a pressure-sensitive adhesive backing. The roll format eliminates disc liners entirely, reducing changeover time on the job. Each disc is 5 inches in diameter, finished to P800 grit, and built on an A-weight light paper backing with open-coat aluminum oxide mineral. This combination makes the disc well suited for fine finishing passes where surface smoothness and load resistance matter. Tradespeople and finishing technicians who run high-volume sanding operations will benefit from the roll format.

This disc roll is used in finishing applications across automotive bodywork, wood finishing, and light metal surface preparation. The P800 grit level targets fine finish work rather than aggressive stock removal, making it appropriate for final sanding stages before priming, sealing, or coating. The Stikit adhesive backing requires a compatible Stikit backup pad, which is sold separately. The open-coat construction keeps the abrasive surface clear of dust and swarf during use, extending usable life per disc.

Key Features

• Roll format eliminates disc liners, reducing changeover time and increasing throughput
• Aluminum oxide mineral delivers durable, fast-cutting performance across a range of substrates
• A-weight light paper backing is suited for fine finishing applications
• Open-coat construction minimizes loading of the abrasive surface during use
• Load-resistant coating extends abrasive grain life and maintains cut rate
• Pressure-sensitive Stikit adhesive backing allows quick pad attachment and removal

Compatibility

Designed for use with 3M Stikit backup pads that accept 5-inch diameter discs; backup pad is sold separately.

Installation Notes

Disc rolls are installed by finishing technicians and tradespeople performing surface prep or fine finish sanding. Before attaching a disc, ensure the backup pad face is clean and free of debris to maintain proper adhesion. Peel the disc from the roll and press firmly onto the pad surface before operating. Worn or contaminated backup pads should be replaced to avoid uneven contact and premature disc release.