3M 7000118922 Abrasive Belt 75x37 Inch 80 Grit Cloth

Product Description

The 3M 7000118922 is an open-coat coated abrasive belt designed for demanding sanding operations in woodworking environments. Built on a heavyweight cloth backing, this belt uses a premium aluminum oxide mineral bonded with a resin system that resists heat and pressure degradation. At 75 inches long and 37 inches wide, it is sized for wide belt sanding machines. The 80-grit rating positions it for stock removal and surface leveling tasks. The open-coat construction, combined with an anti-static treatment, reduces material loading during operation, extending usable belt life and maintaining consistent cut rate across the work surface.

This belt is intended for wide belt and edge sanding applications in both rough sanding and final finishing stages. It is well suited for wood species with high pitch or resin content, such as pine, where conventional belts tend to load quickly. The washable cloth backing allows the belt to be cleaned and returned to service when working through resinous materials. Woodworking shops, millwork facilities, cabinet shops, and industrial finishing operations are the primary environments for this product. Installation is handled by machine operators and maintenance technicians familiar with wide-belt sanding equipment.

Key Features

• Premium aluminum oxide mineral delivers improved cut rate and extended abrasive life
• Open-coat construction reduces loading during sanding, maintaining cut efficiency over time
• Anti-static treatment further limits material buildup on the abrasive surface
• Heavyweight cloth backing handles the mechanical demands of wide belt and edge sanding at coarser grits
• Washable backing makes this belt practical for resinous wood species such as pine
• Resin bond withstands high heat and pressure for longer service life

Compatibility

Designed for use in wide belt and edge sanding machines that accept a 75-inch by 37-inch abrasive belt. Verify machine belt size requirements before installation.

Installation Notes

Wide belt sanding equipment must be fully de-energized and locked out before belt replacement. Confirm belt tracking tension and direction-of-travel arrow alignment per the machine manufacturer guidelines before powering on. Inspect the platen and drive rollers for debris or wear that could cause uneven belt loading or premature failure. Belt changes on wide-belt sanders should be performed by operators or technicians trained on that specific machine model.

Technical Specifications

• Belt Length: 75 inches
• Belt Width: 37 inches
• Grit: 80
• Abrasive Mineral: Aluminum Oxide
• Coat Type: Open Coat
• Backing Material: Heavyweight Cloth
• Bond Type: Resin
• Weight: 5.93 pounds
• Unit of Measure: Each
• Minimum Order Quantity: 3

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7000118922