3M 7000047477 Vinyl Marking Tape Green 0.5in X 36yd

Product Description

The 3M 7000047477 is a green vinyl tape in the 471 series, measuring 0.5 inches wide by 36 yards long with a 5.2 mil total thickness. It uses a vinyl film backing combined with a rubber-based adhesive that bonds firmly to smooth and irregular surfaces alike. The vinyl construction resists heavy abrasion and holds color under sustained wear, making it a reliable choice for floor marking, lane striping, safety designation, and color-coding tasks in industrial and commercial facilities. Licensed tradespeople and facilities maintenance crews install this tape where a clean, straight, repositionable line is needed without surface damage on removal.

This tape is suited for masking, wrapping, sealing, and marking applications involving curved or irregular surfaces. Its conformable, dead-stretch construction prevents the tape from springing back, so it lays flat around bends and contours without puckering. Common applications include lane marking on shop floors, safety boundary lines, color-coding of equipment or piping, abrasion protection on finished surfaces, and splicing tasks. It performs reliably in environments where incidental solvent exposure is a concern.

Key Features

• 5.2 mil vinyl backing with rubber adhesive for firm, stable bond
• Dead-stretch construction lays flat on curves and irregular contours without rebound
• Maintains green color under heavy abrasion and normal shop conditions
• Good solvent resistance for industrial and light chemical environments
• Clean removal leaves minimal adhesive residue on properly prepared surfaces
• Suited for lane marking, safety marking, color-coding, masking, and splicing

Compatibility

Designed as an OEM-style replacement and general-purpose vinyl marking tape for use on smooth, semi-smooth, or moderately textured surfaces in industrial, commercial, and trade service environments.

Installation Notes

Surface preparation is critical — clean the substrate of oils, dust, and moisture before application to ensure full adhesion. Apply firm pressure along the tape length using a roller or squeegee to seat the adhesive. When marking floor lanes or safety lines, use a straightedge or chalk line as a guide before laying the tape. Remove tape at a low angle and at a slow, steady pace to keep adhesive residue on the tape rather than the substrate.