3M 7000045953 Deburring Finishing Wheel 6x24x1 in 7S Fine

Product Description

The 3M 7000045953 is a convolute deburring and finishing wheel built for metalworking applications requiring consistent edge treatment and surface finishing. The wheel measures 6 inches in diameter, 24 inches in width, and 1 inch in arbor hole size. It is convolutely wound on a core, giving it a hard, dense construction rated at 7S density. The abrasive mineral is fine-grade silicon carbide, which cuts efficiently on ferrous and non-ferrous metals while producing a consistent surface finish. At 15 pounds, this is a production-grade wheel suited for use on stationary finishing machines in fabrication and machine shops.

This wheel is used in industrial and commercial metalworking environments for deburring cut edges, light grinding, and surface finishing on metal parts and components. Typical applications include deburring after sawing, stamping, or machining operations. It is installed on bench-mounted or floor-standing finishing lathes and is commonly used by machinists, fabricators, and metal finishing technicians. The 7S density and fine silicon carbide mineral make it appropriate for finishing passes where controlled material removal and smooth surface results are required.

Key Features

• Convolutely wound construction provides hard, consistent density throughout the wheel life
• 7S density rating for firm contact and controlled cut on metal surfaces
• Fine-grade silicon carbide abrasive mineral for smooth finishing and deburring
• 6 inches x 24 inches x 1 inches wheel dimensions suit production finishing equipment
• Production weight of 15 pounds indicates substantial wheel mass for extended service life

Compatibility

Designed as an OEM-style replacement or direct-use convolute wheel for stationary bench and floor finishing lathes that accept a 6-inch diameter, 24-inch wide, 1-inch arbor wheel.

Installation Notes

Installation should be performed by a qualified machinist or finishing equipment operator familiar with abrasive wheel safety. Ensure the finishing machine is fully de-energized and locked out before mounting or removing the wheel. Confirm the machine spindle speed rating does not exceed the maximum RPM marked on the wheel or its packaging before operation. Abrasive wheel mounting and use should comply with applicable ANSI B11 and OSHA 29 CFR 1910.215 standards for abrasive wheel machinery.

Technical Specifications

• Diameter: 6 inches
• Width: 24 inches
• Arbor Hole: 1 inches
• Density Grade: 7S
• Abrasive Mineral: Silicon Carbide
• Grade: Fine
• Construction: Convolutely Wound
• Weight: 15 pounds
• UPC: 00048011155814

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7000045953