3M 7000045313 Abrasive Cloth Belt 60 Grit 0.5x12 Inches

Product Description

The 3M 7000045313 is an alumina zirconia abrasive cloth belt designed for demanding grinding and stock-removal applications. Built on a YF-weight water-resistant polyester cloth backing with resin bonding for heat resistance, this belt delivers consistent cut rate across extended use cycles. The 60-grit designation makes it well suited for aggressive material removal on metal, weld seams, and hard surfaces. A built-in grinding aid promotes cooler cutting, reducing heat buildup at the workpiece. The belt measures 0.5 inches wide by 12 inches long and can be run wet or dry, giving the operator flexibility depending on the application setup.

This belt is used in metal fabrication, maintenance, and finishing operations where a narrow, short-format belt is required. Typical applications include pipe work, tubing, and contoured or tight-clearance surfaces that require a small-diameter contact wheel or platen setup. Electricians, pipefitters, plumbers, and general metalworkers commonly use belts of this type for deburring, surface prep, and weld blending. The water-resistant backing allows use with cutting fluids or coolants without degradation of the cloth or bond.

Key Features

• Alumina zirconia abrasive grain for aggressive, durable cut
• YF-weight polyester cloth backing resists water and flexes over contours
• Resin bond construction provides heat resistance during sustained grinding
• Grinding aid included for cooler cutting and reduced workpiece heat
• Runs wet or dry for application flexibility
• 60 grit for rapid stock removal and weld blending

Compatibility

Designed as a replacement-style abrasive cloth belt for belt grinders, file belt machines, and power tool setups accepting 0.5-inch by 12-inch belts.

Installation Notes

Install on a belt grinder or file belt unit rated for the belt dimensions before powering the tool. Confirm belt tracking and tension before starting a grind pass. Wear appropriate PPE including eye protection and gloves when operating abrasive belts. Inspect the belt for tears or edge fraying before each use and replace if damage is found.

Technical Specifications

• Abrasive Material: Alumina Zirconia
• Backing Type: YF-Weight Water-Resistant Polyester Cloth
• Bond Type: Resin
• Grit: 60
• Belt Width: 0.5 inches
• Belt Length: 12 inches
• Operating Mode: Wet or Dry
• Weight: 0.02 pounds
• UOM: Each
• Minimum Order Quantity: 50
• UPC: 00051111686683

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7000045313