3M 7000001973 Hook Fastener Roll 1 Inch X 50 Yd White

Product Description

The 3M 7000001973 is a pressure-sensitive adhesive nylon hook fastener roll designed for reliable hook-and-loop applications in both indoor and outdoor environments. The roll measures 1 inch wide by 50 yards long and features a high-performance acrylic adhesive backing protected by a clear polyethylene film liner. Engaged thickness ranges from 100 mil to 160 mil, with a 3.5 mil printed liner. The hook side bonds securely to paint, bare metal, painted metal, glass, sealed wood, and many plastics. Licensed HVAC, facilities, and maintenance professionals specify this product where a cleanly applied, repositionable mechanical fastener is needed without mechanical hardware.

This hook fastener roll is suited for light-duty panel retention, wire routing, signage mounting, and equipment labeling in residential and commercial settings. Its high-temperature acrylic adhesive maintains bond strength across a wide service range, making it practical for installations near HVAC equipment, electrical enclosures, or other environments where ambient temperatures fluctuate. The white nylon face blends with standard interior surfaces. The roll format allows cut-to-length application in the field without additional tooling.

Key Features

• Pressure-sensitive acrylic adhesive — no activation required, bonds on contact
• Engaged thickness of 100 mil to 160 mil for consistent hook-and-loop engagement
• 3.5 mil printed liner for controlled, clean liner removal during application
• High-temperature performance acrylic adhesive maintains bond under thermal cycling
• Bonds to paint, bare and painted metal, glass, sealed wood, and many plastics
• Rated for indoor and outdoor use

Compatibility

Designed for use as the hook component in standard hook-and-loop fastener systems; intended for pairing with a compatible loop fastener on the mating surface.

Installation Notes

Clean and dry the mounting surface thoroughly before applying the adhesive-backed hook strip — contaminants such as oil, dust, or moisture will reduce bond strength. Peel the polyethylene film liner and press the strip firmly onto the substrate with even hand pressure along the full length of the tape. Allow adequate dwell time before applying load, per general pressure-sensitive adhesive practice. No special tools or certifications are required, though follow applicable facility or equipment manufacturer guidelines when mounting near energized components.