3M 7000000569 Hookit Film Disc 260L 6 Inch P800 Grit

Product Description

The 3M 7000000569 is a coated abrasive film disc in the 260L series, designed for high-finish sanding work in auto body repair and paint preparation. The disc measures 6 inches in diameter and carries a P800 fine grit aluminum oxide cutting surface bonded to a durable, tear-resistant film backing. The film substrate maintains a consistent cut geometry across the disc face, which helps produce a uniform scratch pattern during blending, scuffing, paint prep, and paint defect removal. The Hookit attachment system allows fast disc swaps and repeated reuse without sacrificing holding strength. Auto body technicians and professional painters are the primary installers.

This disc is suited for residential and commercial auto body shop environments where finish quality is critical. Typical applications include blending clear coat, scuffing between coats, removing minor paint defects, and preparing surfaces for primer or topcoat. The P800 grit position fits mid-to-fine finishing stages where a controlled scratch profile is needed before moving to polish or compound. The aluminum oxide mineral delivers a fast initial cut that tapers predictably as the disc wears, making it well-suited for hand-guided random orbital or rotary tool use.

Key Features

• 6 inch diameter with P800 fine grit aluminum oxide abrasive mineral
• Film backing is tear-resistant and delivers a consistent finish surface
• Hookit attachment system enables fast disc changes and extended disc reuse
• Suited for blending, scuffing, paint prep, and paint defect removal
• Grit range in the 260L series spans P600 to P1500 for multi-stage finishing workflows

Compatibility

Designed for use with Hookit-compatible random orbital and rotary sanding tools. Verify your backup pad accepts the Hookit hook-and-loop interface before installing.

Installation Notes

This disc is installed by auto body technicians using Hookit-compatible backup pads on pneumatic or electric orbital sanders. Confirm the tool is powered off and air supply is disconnected before changing discs. Inspect the backup pad face for debris or worn hooks before attaching a new disc, as a compromised pad surface reduces disc retention and finish quality. Follow shop ventilation requirements and applicable safety guidelines when sanding coated surfaces.