3M 7000000350 Overspray Protective Sheeting 12ft X 400ft

Product Description

The 3M 7000000350 is a clear, high-density polyethylene protective sheeting designed to shield vehicle surfaces from paint overspray during automotive refinishing operations. At 0.4 mil thick, the film delivers a balance of tear resistance and conformability, clinging securely to vehicle contours without a center seam to interrupt coverage. The corona-treated surface provides enhanced anchorage for overspray particles, keeping drifting paint locked to the sheeting rather than migrating onto unmasked panels. The 12-foot width is sized for smaller passenger vehicles. Each roll covers 400 feet of run length, making it practical for high-volume refinishing environments.

This sheeting is intended for use in automotive body shops and refinishing facilities during spray paint operations. The 12-foot film width is well suited to compact and mid-size vehicles where a narrower drape reduces excess material. It is designed to be dispensed with the 3M Masker PN 06780, integrating directly into a standard mask-and-drape workflow. Painters and body technicians apply this sheeting as part of pre-spray vehicle preparation to protect glass, trim, tires, and body panels outside the paint zone.

Key Features

• 0.4 mil thick film for improved tear resistance over previous formulations
• Seamless construction eliminates center seam for uninterrupted coverage
• Corona-treated surface for enhanced paint overspray anchorage
• Improved cling properties conform to vehicle body contours
• 12-foot width sized for smaller passenger vehicles
• 400-foot roll length supports high-volume shop use

Compatibility

Designed for use with the 3M Masker PN 06780. Suited for overspray protection on compact and mid-size vehicles in automotive refinishing applications.

Installation Notes

This sheeting is applied by automotive refinishing technicians as part of pre-spray vehicle masking procedures. Load the roll into the compatible 3M Masker dispenser before dispensing. Ensure all masking tape edges are fully sealed before beginning any spray operation to prevent overspray migration. Follow shop ventilation and PPE requirements in accordance with applicable safety data sheets for the coatings being applied.

Technical Specifications

• Film Thickness: 0.4 mil
• Width: 12 feet
• Roll Length: 400 feet
• Unit of Measure: Roll
• Package Weight: 10.5 pounds
• Package Length: 38.8 inches
• Package Width: 5.8 inches
• Package Height: 5.6 inches
• UPC: 00051131067271

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7000000350