2GIG 2gig-brdg-1900 Ip Communicator Bridge 900 Mhz

Product Description

The 2GIG 2gig-brdg-1900 is an IP communicator bridge that provides Internet connectivity between a compatible security control panel and a monitoring service central station. It connects via a local network router using a standard Ethernet cable, enabling real-time signal forwarding and supervision. The unit supports firmware updates delivered over the Internet, keeping the panel current without on-site service visits. Wireless communication with the control panel requires the 900 MHz transceiver module 2GIG-XCVR2-345, which must be installed in the panel prior to commissioning this device. Installation is typically performed by licensed security alarm technicians.

The 2gig-brdg-1900 is designed for residential and light commercial security installations using compatible 900 MHz control panels. It is used in installations where remote monitoring, interactive security services, and over-the-air firmware updates are required by the monitoring service or end-user agreement. The device bridges the control panel to a broadband router over Ethernet, making it suitable for sites with an active wired LAN connection. The 900 MHz transceiver module 2GIG-XCVR2-345 must be present in the control panel for wireless panel communication to function.

Key Features

• Provides IP-based Internet connectivity between the security control panel and the central station
• Supports over-the-Internet firmware updates for the connected control panel
• Enables interactive security services through the monitoring network
• Central station supervision via signal-forwarding over IP
• Connects to local network router via standard Ethernet cable
• Requires 2GIG-XCVR2-345 900 MHz transceiver installed in panel for wireless panel communication

Compatibility

Compatible with 2GIG Go!Control security panels when the 2GIG-XCVR2-345 900 MHz transceiver module is installed in the control panel. Ethernet cable is not included.

Installation Notes

Installation should be performed by a licensed security alarm technician familiar with low-voltage wiring practices. Power down the control panel before connecting or disconnecting the communicator module. Ensure the local network router is active and an Ethernet port is available before beginning installation. Verify transceiver module 2GIG-XCVR2-345 is seated in the control panel before attempting to commission the bridge.

Technical Specifications

• Communication Interface: Ethernet (wired LAN)
• Wireless Frequency: 900 MHz (requires 2GIG-XCVR2-345 transceiver)

Standard Information

• Brand: 2GIG
• Manufacturer Part Number: 2gig-brdg-1900