10/2 Nmb Romex 250FT Coil Nm-b Building Wire 250 Ft

Product Description

The ALLIED MOULDED PRODUCTS 10/2 NMB ROMEX 250FT COIL is a 250-foot coil of 10 AWG, 2-conductor nonmetallic-sheathed (NM-B) building wire. NM-B cable is the standard for residential branch circuit wiring in dry, concealed locations. This coil includes two insulated 10 AWG conductors plus a bare copper ground, all wrapped in a PVC outer jacket rated for 90 degrees C. Electricians reach for 10/2 NM-B when rough-wiring 30-amp circuits such as dryers, water heaters, and range outlets. The 250-foot coil length is sized for typical single-room or single-circuit residential rough-in work.

This wire is used in residential and light commercial construction wherever NM-B cable is code-permitted — primarily in dry, indoor, concealed applications within walls, ceilings, and floor cavities. Common applications include 30-amp dedicated circuits for kitchen appliances, electric dryers, HVAC equipment circuits, and similar branch circuits. It is pulled and terminated by licensed electricians or qualified electrical contractors following applicable local codes and the National Electrical Code (NEC).

Key Features

• 10 AWG, 2-conductor plus bare copper ground construction for 30-amp circuit capacity
• NM-B designation rated for dry, concealed residential and light commercial installations
• 90 degrees C conductor temperature rating for reliable performance in typical branch circuit applications
• PVC outer jacket provides mechanical protection and easy identification
• 250-foot coil length suited for single-circuit rough-in runs

Compatibility

Designed as a standard 10/2 NM-B nonmetallic-sheathed cable for use in residential and light commercial branch circuit wiring where NM-B cable is permitted by the authority having jurisdiction.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the NEC and all applicable local electrical codes. De-energize and lock out the panel before making any connections. NM-B cable is approved only for dry, concealed locations — do not install in wet or damp areas, conduit exposed to moisture, or where physical damage is likely without additional protection. Support and secure the cable at intervals required by NEC Article 334.

Technical Specifications

• Wire Gauge: 10 AWG
• Configuration: 2-conductor plus bare ground (10/2)
• Cable Type: NM-B (Nonmetallic-Sheathed)
• Length: 250 feet
• UPC: 04824316310

Standard Information

• Brand: ALLIED MOULDED PRODUCTS
• Manufacturer Part Number: 10/2 NMB ROMEX 250FT COIL