mi-t-m

Product Description The MI T M CORP AW-0018-0302 is a 0-degree high pressure spray nozzle with a 3.0 orifice size, sold in a pack of four. The 0-degree spray pattern produces a concentrated, pencil-point stream that delivers maximum impact force at the nozzle tip....

Product Description The MI T M CORP AW-0018-0303 is a 25-degree high pressure spray nozzle designed for use with professional-grade pressure washing equipment. Featuring a 3.0 orifice size and a green color-coded body for quick tip identification in the field, this nozzle delivers a...

Product DescriptionThe MI T M CORP AW-0018-0304 is a high-pressure spray nozzle designed for use with pressure washing equipment. Built for a 40-degree spray pattern and a 3.0 orifice size, this white nozzle delivers a wide, low-impact fan of water suited for rinsing large...

Product Description The MI T M CORP AW-0018-0364 is a rotating nozzle and lance assembly rated for pressure washer systems operating up to 2400 PSI. The rotating tip delivers a spinning water pattern that concentrates cleaning force across a wider strike zone compared to...

Product Description The MI T M CORP AW-0023-0487 is a screw-type coupler designed for pressure washer hose and gun connections. It features a 0.25 inch Male Nominal Pipe Thread (MNPT) inlet on one end and an M22 threaded fitting on the other, allowing a...

Product Description The MI T M CORP AW-0023-0488 is a pressure washer screw coupler designed to connect 1/4 inch Female Nominal Pipe Thread (FNPT) fittings to M22 threaded connections. This coupling hardware is a common service part used to link pressure washer hoses, guns,...

Product Description The MI T M CORP AW-0023-0489 is a pressure washer screw coupler designed to connect 3/8 inch Male National Pipe Thread (MNPT) fittings to M22 threaded connections. This type of coupler serves as a critical interface between the high-pressure hose and the...

Product Description The MI T M CORP AW-0023-0490 is a pressure washer screw coupler designed to connect a 3/8 inch Female National Pipe Thread (FNPT) fitting to an M22 threaded connection. This fitting serves as an adapter between the pump outlet or wand assembly...

Product Description The MI T M CORP AW-0023-0491 is a screw nipple fitting designed to connect 0.25 inch Male Nominal Pipe Thread (MNPT) inlets to M22 threaded outlets on pressure washer equipment. This small-diameter fitting serves as a critical transition point in high-pressure water...

Product DescriptionThe MI T M CORP AW-0023-0492 is a pressure washer screw nipple designed to connect a 1/4-inch Female National Pipe Thread (FNPT) fitting to an M22 threaded component. This adapter-style fitting is a standard connection point used in pressure washing equipment, allowing technicians...

Product Description The MI T M CORP AW-0023-0493 is a pressure washer screw nipple designed to connect 3/8 inch Male Nominal Pipe Thread (MNPT) fittings to M22 threaded components. This adapter-style nipple serves as a transition fitting in pressure washer plumbing circuits, allowing techs...

Product Description The MI T M CORP AW-0023-0494 is a pressure washer screw nipple designed to connect a 3/8 inch Female National Pipe Thread (FNPT) fitting to an M22 threaded outlet. This small but critical adapter serves as an interface between pressure washer hoses,...

Product DescriptionThe MI T M CORP AW-0025-0122 is a 10-pack of replacement O-rings designed for use with 1/4 inch quick connect pressure washer sockets. These O-rings maintain a leak-free seal at the quick connect interface, a high-wear point on any pressure washer setup. Made...

Product Description The MI T M CORP AW-0025-0123 is a 10-pack of replacement O-rings designed for use with 3/8 inch quick connect pressure washer sockets. These O-rings maintain a leak-free seal at the quick connect junction, preventing pressure loss and water bypass during operation....

Product Description The MI T M CORP AW-0050-0176 is a 23-foot wire braided high-pressure extension hose designed for use with gas and electric pressure washers. It is rated to 3500 psi and fitted with M22-14MM male and female threaded ends for secure, leak-resistant connections....

Product Description The MI T M CORP AW-0851-0096 is a 36-inch extension wand designed for use with pressure washers. It connects between the spray gun and the nozzle, extending reach for surface cleaning, siding wash-down, and equipment rinsing without requiring the operator to crouch...

Product Description The MI T M CORP AW-0851-0338 is a high pressure extension hose designed for professional pressure washing applications. Measuring 3/8 inches in diameter and 50 feet in length, this hose is rated to 4,000 psi, making it suitable for demanding cleaning tasks....

Product Description The MI T M CORP AW-4003-0000 is a four-piece high pressure spray nozzle set built for pressure washing applications. Each pack includes one nozzle in four spray patterns: 0 degree, 15 degree, 25 degree, and 40 degree. The 3.0 orifice sizing is...

Product Description The MI T M CORP AW-4004-0000 is a four-piece high pressure spray nozzle set designed for use with compatible pressure washers. The kit includes four nozzles, each with a 4.0 orifice size, covering the four most common spray patterns: 0 degree, 15...

Product DescriptionThe MI T M CORP AW-4018-0026 is a concentrated, multi-purpose liquid cleaner formulated specifically for use with pressure washers. The formula is biodegradable and includes additives that help prevent spotting on treated surfaces. Each unit ships as a case of four 1-gallon containers,...