TIGRE

Product DescriptionThe TIGRE USA INC 36-641 is a 4-inch sewer drain cleanout body designed for use in sanitary drain, waste, and vent (DWV) piping systems. This fitting provides a dedicated access point in underground or in-wall drain lines, allowing service technicians to insert drain...

Product Description The TIGRE USA INC 36-642 is a 6-inch cleanout body fitting designed for sewer drain systems. It provides access to drain lines for inspection, rodding, and clearing blockages without requiring pipe disassembly. The fitting integrates into a sewer drain run as a...

Product Description The TIGRE USA INC 36-644 is a 4-inch PVC sewer female adapter fitting designed to transition between a hub-end pipe and a female iron pipe thread connection. This fitting is used to join PVC sewer pipe to threaded iron pipe in drainage...

Product Description The TIGRE USA INC 36-648 is an offset flush fit downspout adapter designed to transition rain gutter downspouts to underground sewer piping. It accommodates a three-way dimensional fit at 2 inches, 3 inches, and 4 inches, allowing it to bridge the size...

Product DescriptionThe TIGRE USA INC 36-652 is a 4-inch sewer-to-downspout adapter designed to transition metal rain gutter drainage into underground sewer piping. This fitting connects a 2-inch by 3-inch metal rain gutter downspout to a 4-inch underground sewer line, providing a secure, watertight junction...

Product DescriptionThe TIGRE USA INC 36-665 is a 4-inch sewer and drain PVC coupling designed to join sections of PVC pipe in below-grade and above-grade drainage systems. This fitting creates a secure, solvent-weld connection between two pipe ends of equal diameter, maintaining consistent flow...

Product DescriptionThe TIGRE USA INC 36-668 is a 4-inch, 22.5-degree sewer and drain elbow designed to redirect drain flow at a shallow angle in below-grade and in-wall drain, waste, and vent (DWV) piping systems. The 22.5-degree sweep allows installers to make gradual directional changes...

Product Description The TIGRE USA INC 36-672 is a 6-inch 45-degree elbow fitting designed for sewer and drain piping systems. This fitting redirects flow at a 45-degree angle, making it a standard component in underground and above-ground drain, waste, and vent (DWV) installations. It...

Product Description The TIGRE USA INC 36-677 is a 4-inch sewer and drain 90-degree long-turn elbow designed for gravity-flow drainage piping systems. The long-turn geometry reduces flow restriction compared to standard short-turn fittings, making it a preferred choice where drain line routing must change...

Product DescriptionThe TIGRE USA INC 36-678 is a 6-inch PVC 90-degree long turn sanitary elbow designed for sewer and drain piping systems. Also referred to as a quarter bend, this fitting redirects flow direction within a drainage line while maintaining smooth, unobstructed flow through...

Product Description The TIGRE USA INC 36-680 is a 4-inch sewer and drain street elbow designed for 90-degree long-sweep directional changes in below-grade and above-grade drain, waste, and vent (DWV) piping systems. The long-sweep geometry reduces flow resistance compared to short-turn fittings, making it...

Product DescriptionThe TIGRE USA INC 36-686 is a 4-inch sewer drain cap designed to close off and seal the open end of a sewer or drain line. This fitting is used to terminate or test drain piping by creating a secure, watertight closure at...

Product Description The TIGRE USA INC 36-687 is a 6-inch sewer drain cap designed to terminate or plug sewer and drain piping during rough-in, testing, or permanent abandonment of a drain line. This fitting provides a secure, code-compliant closure on open pipe ends and...

Product DescriptionThe TIGRE USA INC 36-695 is a 4-inch male pipe thread (MPT) plug used to seal and cap open pipe ends in drain, waste, and vent piping systems. This fitting threads directly onto female-threaded fittings or pipe openings, creating a secure, pressure-tight closure....

Product DescriptionThe TIGRE USA INC 36-696 is a 6-inch plug designed for sealing sewer and drain lines during testing, inspection, or service. This fitting provides a secure, temporary or permanent closure at the open end of a 6-inch drain pipe. Plumbers and drain technicians...

Product Description The TIGRE USA INC 36-721 is a 4-inch sanitary tee fitting designed for sewer and drain piping systems. Sanitary tees direct wastewater flow from branch lines into a main drain line while maintaining proper drainage slope and preventing backflow turbulence. This fitting...

Product DescriptionThe TIGRE USA INC 36-723 is a 6-inch sanitary tee fitting designed for sewer and drain piping systems. Sanitary tees provide a swept branch inlet that directs flow smoothly from a branch line into a vertical drain stack, reducing turbulence and maintaining proper...