-
Southwark 16S148 VERT TRUNK 90 14 X 8Vendor SOUTHWARK METALSKU: 16S148Product DescriptionThe Southwark Metal MFG CO 16S148 is a vertical trunk elbow designed for HVAC systems. This product has a size of fourteen inches by eight inches and features a ninety-degree angle. Made from 24 gauge steel Hot dipped galvanized finish Meets ASTM A653...
- $42.51
- $42.51
- Unit price
- per
-
Southwark Metal 27R2106 2-1/4 x 10 x 6 Straight BootVendor SOUTHWARK METALSKU: 27R2106Product DescriptionThe Southwark Metal MFG CO 27R2106 is a straight register boot designed for efficient air distribution in HVAC systems. This product measures two and one-fourth inches by ten inches with a six-inch diameter. It is made of steel and features hot dipped galvanized...
- $21.99
- $21.99
- Unit price
- per
-
Gray Metal South 10X4X5-113R 90 Degree Boot Galvanized Steel 30 gaVendor GRAY METAL SOUTHSKU: 10X4X5-113RProduct DescriptionThe Gray Metal South 10X4X5-113R is a 90 degree boot designed for use in heating and cooling systems. This galvanized steel boot is built to connect ductwork and ensure proper airflow. The size is ten inches by four inches at the inlet and...
- $21.99
- $21.99
- Unit price
- per
-
Southwark Metal 557NC 55 7' End Cap No CrimpVendor SOUTHWARK METALSKU: 557NCProduct DescriptionThe Southwark Metal 557NC is a non-crimped end cap designed for duct systems. This product is part of the 55 series and measures seven inches, making it suitable for various HVAC applications. Non-crimped design for easier installation Manufactured from hot dipped galvanized steel...
- $21.99
- $21.99
- Unit price
- per
-
Southwark Metal SL601230 12 in x 60 in 30 ga Galvanized Steel Round Duct PipeVendor SOUTHWARK METALSKU: SL601230Product DescriptionSouthwark Metal SL601230 is a round duct pipe with a diameter of twelve inches and a length of sixty inches. It is constructed from thirty gauge galvanized steel, providing a tough and durable option for heating and cooling applications. Diameter: twelve inches Length:...
- $28.20
- $28.20
- Unit price
- per
-
Gray Metal South 18X16-311P Duct Reducer 18 inch x 16 inchVendor GRAY METAL SOUTHSKU: 18X16--311PProduct DescriptionThe Gray Metal South 18X16-311P is an effective duct reducer. This 18 inch by 16 inch part helps connect different sizes of ducts in HVAC systems. It is designed to optimize airflow while minimizing pressure loss in air conditioning and heating systems. Nominal...
- $50.17
- $50.17
- Unit price
- per
-
General Plastics B4148 4 x 8 x 14 Register Boot BoxVendor GENERAL PLASTICSSKU: B4148Product DescriptionThe General Plastics B4148 is a 4 x 8 x 14 register boot box designed for HVAC applications. It features high-density polyethylene material for strength and durability. This register boot box is suitable for installations under slabs, in raised floors, and crawl spaces...
- $50.19
- $50.19
- Unit price
- per
-
Southwark 27R2126 Straight Register Boot 6 in Dia Hot Dipped GalvanizedVendor SOUTHWARK METALSKU: 27R2126Product DescriptionThe Southwark Metal MFG CO 27R2126 Straight Register Boot is designed to connect ducting systems effectively. This product features a diameter of six inches and a length of twelve inches. The boot is made from thirty-gauge steel and is hot-dipped galvanized for enhanced...
- $21.99
- $21.99
- Unit price
- per
-
Southwark Metal 902026 20'' 26GA Elbow Adjustable 90 degVendor SOUTHWARK METALSKU: 902026Product Description The Southwark 902026 is a twenty-inch adjustable elbow made from 26 gauge steel. This fitting is designed for use in heating and air conditioning systems, helping to redirect airflow efficiently at a ninety-degree angle. Adjustable design for versatile installation. Constructed with durable...
- $97.79
- $97.79
- Unit price
- per
-
SOUTHWARK METAL MFG CO 84ST16 84ST 16 DUCTBOARD COLLARVendor SOUTHWARK METALSKU: 84ST16Product DescriptionThe SOUTHWARK METAL MFG CO 84ST16 is a reliable duct board collar designed for HVAC applications. This product is made of twenty-eight gauge steel and features a hot dipped galvanized finish for durability. The collar is specifically sized at sixteen inches, making it...
- $22.10
- $22.10
- Unit price
- per
-
Southwark 28RR2126 Right End Register Boot, 6 in Dia, Hot Dipped Galvanized, Gray, SteelVendor SOUTHWARK METALSKU: 28RR2126Product DescriptionThe Southwark Metal MFG CO 28RR2126 is a right end register boot designed for efficient airflow management in HVAC systems. With a diameter of six inches, a length of twelve inches, and a width of two and one-fourth inches, this boot is constructed...
- $21.99
- $21.99
- Unit price
- per
-
SOUTHWARK METAL MFG CO WS16310 16 3-1/4X10 VERT 90Vendor SOUTHWARK METALSKU: WS16310Product DescriptionThe SOUTHWARK METAL MFG CO WS16310 is a stack elbow designed for shortway vertical installations. It has a size of three and one-quarter inches by ten inches and features a ninety-degree angle. This component is made of steel and is hot dipped galvanized...
- $28.05
- $28.05
- Unit price
- per
-
Southwark 11505 Southwark 1150-5 Duct Collar 5 Inch Replacement MPNVendor SOUTHWARK METALSKU: 11505Product DescriptionThe Southwark 1150-5 Duct Collar is designed for use in air distribution systems. The model number is 11505, indicating it is a quality product from Southwark Metal. This duct collar features a five-inch vent size and is made from durable sheet metal with...
- $21.99
- $21.99
- Unit price
- per
-
General Plastics RC86P 8 x 6 PVC Concentric ReducerVendor GENERAL PLASTICSSKU: RC86PProduct DescriptionThe General Plastics RC86P is an eight by six inch concentric reducer fitting made of PVC. This reducer is ideal for HVAC applications, specifically for connecting ductwork where different diameters meet. It is designed for both under slab and raised floor installations, catering...
- $44.78
- $44.78
- Unit price
- per
-
Gray Metal South 4-406A 4 inch Adhesive Saddle TakeoffVendor GRAY METAL SOUTHSKU: 4-406AProduct DescriptionThe Gray Metal South 4-406A is a four inch adhesive saddle takeoff designed for efficient duct work applications. This takeoff is suitable for installation without a damper and is crafted for use with round pipe. The adhesive installation method simplifies setup and reduces...
- $21.99
- $21.99
- Unit price
- per
-
Gray Metal South 14X6X8-110R 14 x 6 x 8 in. Straight BootVendor GRAY METAL SOUTHSKU: 14X6X8-110RProduct DescriptionThe Gray Metal South 14X6X8-110R is a straight boot designed for HVAC applications. This duct fitting is made from galvanized steel and has a thickness of 30 gauge. It measures fourteen inches by six inches for effective airflow. This boot is ideal for...
- $21.99
- $21.99
- Unit price
- per
-
Metal-Fab 5MFT Tall Cone Flat Roof Flashing 5 in 14.63 in x 14.63 inVendor METAL-FABSKU: 5MFTProduct DescriptionThe Metal-Fab 5MFT is a tall cone flat roof flashing designed for commercial use. This product features a sturdy aluminum material, making it suitable for type B gas vent systems. The base dimensions are fourteen point sixty-three inches by fourteen point sixty-three inches,...
- $32.65
- $32.65
- Unit price
- per
-
Southwark 14S168 Broadway Flat Elbow 90 deg 16 x 8 inVendor SOUTHWARK METALSKU: 14S168Product Description The Southwark Metal MFG Co 14S168 is a Broadway Flat Elbow designed for HVAC applications. This product features a size of sixteen by eight inches with a ninety-degree angle. It is constructed from twenty-six gauge steel and is hot dipped galvanized for...
- $45.49
- $45.49
- Unit price
- per
-
Southwark Metal MFG CO 211610 21 16X10 End CapVendor SOUTHWARK METALSKU: 211610Product DescriptionThe Southwark Metal MFG CO 211610 is a 21 16X10 end cap designed for connecting ducts in HVAC systems. This product measures sixteen inches by ten inches and is made from twenty-six gauge steel. It is hot dipped galvanized for corrosion resistance. Constructed...
- $21.99
- $21.99
- Unit price
- per
-
Southwark 5510NC 55 10'' End Cap No CrimpVendor SOUTHWARK METALSKU: 5510NCProduct DescriptionThe Southwark Metal MFG CO 5510NC is a non-crimped round end cap designed for duct systems. This product features a size of ten inches and is made from steel with a hot-dipped galvanized finish for durability. Non-crimped design ensures a secure fit. Made...
- $21.99
- $21.99
- Unit price
- per
- Choosing a selection results in a full page refresh.