{"product_id":"yg-1-d2gp185004-jobber-drill-1-16-inch-hss-tin","title":"YG-1 D2GP185004 Jobber Drill 1\/16 Inch Hss Tin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe YG-1 D2GP185004 is a high speed steel jobber-length drill bit designed for general-purpose drilling in steel and similar workpiece materials. It measures 1\/16 inch (0.0625 inch) in diameter with an overall length of 1-7\/8 inches and a flute length of 7\/8 inch. The 135-degree split point geometry reduces walking on entry and lowers the thrust force required to start a hole, making it well suited for production and maintenance drilling without a center punch. A titanium nitride (TiN) coating increases surface hardness and reduces friction to extend tool life in repetitive drilling applications.\u003c\/p\u003e\u003cp\u003eThis drill bit is intended for drilling steel and comparable ferrous materials in general shop, maintenance, and fabrication environments. The right-hand, regular spiral flute configuration provides efficient chip evacuation in standard through-hole and blind-hole applications. The straight cylindrical shank at 1\/16 inch diameter accepts standard drill chucks found on benchtop drill presses, cordless drills, and hand drills. With a flute-by-diameter ratio of 14xD, this bit is suited for moderate-depth holes within the 7\/8 inch maximum drilling depth.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e135-degree split point reduces bit walking and entry thrust without requiring center punching\u003c\/li\u003e\n\u003cli\u003eTiN coating improves surface hardness and reduces friction for extended tool life in steel drilling\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction provides toughness and heat resistance in general-purpose drilling\u003c\/li\u003e\n\u003cli\u003eRight-hand, regular spiral flute promotes efficient chip evacuation in ferrous materials\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank fits standard drill chucks; no flats, no adapters required\u003c\/li\u003e\n\u003cli\u003eTwo-flute design balances chip clearance with wall finish on small-diameter holes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber drill bit for use in steel and similar primary workpiece materials. Compatible with any standard drill chuck sized to accept a 1\/16 inch straight shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit is installed and removed by a licensed or qualified machinist, maintenance technician, or fabricator using a standard keyed or keyless drill chuck. Ensure the drill press or hand drill is powered off and unplugged before changing bits. Use appropriate cutting fluid or lubricant when drilling steel to manage heat buildup and extend bit life. Do not exceed the rated drilling depth of 7\/8 inch without retracting to clear chips.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1\/16 inch (0.0625 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-7\/8 inches (1.875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/16 inch (0.0625 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiN (Titanium Nitride)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 7\/8 inch (0.875 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Margin\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: -0.0005 to +0.0000 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: D2GP185\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: YG-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: D2GP185004\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YG-1","offers":[{"title":"Default Title","offer_id":67912145961266,"sku":"D2GP185004","price":37.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d8b38f05880d433291be2489fcf1ef7c.jpg?v=1791227786","url":"https:\/\/voomisupply.com\/products\/yg-1-d2gp185004-jobber-drill-1-16-inch-hss-tin","provider":"Voomi Supply","version":"1.0","type":"link"}