{"product_id":"yg-1-01301-square-end-mill-5-16-in-2-flute-cobalt","title":"YG-1 01301 Square End Mill 5\/16 in 2 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe YG-1 01301 is a single-end, square-profile cobalt end mill designed for metal removal in milling applications. Ground from M42 cobalt high-speed steel, it holds an edge longer than standard HSS tooling, particularly in abrasive or work-hardening materials. The cutter measures 5\/16 inch in diameter with a 9\/16-inch length of cut and a 2-5\/16-inch overall length. Two right-hand spiral flutes at a 30-degree helix angle clear chips efficiently and reduce cutting forces on lighter setups. This tool is center-cutting, meaning it can be used for plunge entry as well as peripheral milling. The bright uncoated finish suits general-purpose use and allows easy visual inspection of the cutting edge.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for machining steel, aluminum, and non-ferrous metals in job shop, maintenance, and production environments. The 3\/8-inch Weldon flat shank locks securely in a set-screw holder, reducing pullout risk during side-load operations. It is a standard regular-length geometry, appropriate for open-pocket, slot, and profile milling on manual mills, knee mills, and CNC machining centers where tool length and rigidity are not limiting factors. Primary workpiece materials include steel and aluminum and other non-ferrous alloys.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt HSS construction for extended tool life over standard HSS in abrasive materials\u003c\/li\u003e\n  \u003cli\u003e2 right-hand spiral flutes with 30-degree helix for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting geometry allows plunge and ramp entry without a pre-drilled hole\u003c\/li\u003e\n  \u003cli\u003eWeldon flat shank (3\/8 inch) resists rotational and axial pullout in set-screw holders\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish for general-purpose use on steel, aluminum, and non-ferrous alloys\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction; no variable helix or chipbreaker for straightforward tool path programming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose replacement or new-install end mill for standard 3\/8-inch Weldon flat shank tool holders used on manual and CNC milling machines. Primary workpiece materials are steel and aluminum and non-ferrous alloys per the manufacturer specification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom technician. Seat the Weldon flat against the set screw in the holder before torquing to prevent axial slip. Confirm spindle speed and feed rate are appropriate for the workpiece material and cutter diameter before starting the cut. Inspect the cutting edges for chips or wear before each use, as cobalt tooling can micro-chip if run at incorrect parameters.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/16 inches (0.3125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 9\/16 inches (0.5625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-5\/16 inches (2.3125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: 0.0000 to -0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel; Aluminum and Non-Ferrous\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: E2030\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Fractional Inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: YG-1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01301\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YG-1","offers":[{"title":"Default Title","offer_id":67950573945138,"sku":"01301","price":36.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0dcd788b1c059586c7a8e03fc51106fc_c5748944-87c5-46c8-ad4c-85d570f53857.jpg?v=1791721866","url":"https:\/\/voomisupply.com\/products\/yg-1-01301-square-end-mill-5-16-in-2-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}