{"product_id":"winters-ppc5060-g-pressure-gauge-0-30-psi-4-5-in-dial","title":"Winters PPC5060-G. Pressure Gauge 0-30 Psi 4.5 in Dial","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe WINTERS PPC5060-G. is a glycerine-filled process industrial pressure gauge built for demanding fluid and gas monitoring applications. It features a 4.5-inch dual-scale analog dial with a 0 to 30 psi range and reads in both psi and an alternate scale. The thermoplastic case houses 316 stainless steel wetted parts and a stainless steel Bourdon tube, making it well-suited for corrosive media. Accuracy is rated at 0.5 percent of scale, meeting ANSI\/ASME Grade 2A requirements. Licensed HVAC technicians, industrial plumbers, and process instrumentation technicians typically install and service this gauge.\u003c\/p\u003e\u003cp\u003eThis gauge fits process and industrial piping systems where a durable, liquid-filled instrument is required to dampen vibration and pulsation. The glycerine fill stabilizes the needle under dynamic line conditions, reducing wear on the Bourdon tube and improving readability. Lower mount configuration with a 0.5-inch NPT male connection allows direct in-line or panel-bottom installation. The polycarbonate lens and IP65-rated thermoplastic case protect the internals in wet or wash-down environments. Operating temperature range is -40 degrees F to 250 degrees F, which covers most hydronic, compressed air, water, and light chemical service installations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eGlycerine-filled for vibration and pulsation dampening on active process lines\u003c\/li\u003e\n\u003cli\u003e316 stainless steel Bourdon tube and wetted parts resist corrosion from process media\u003c\/li\u003e\n\u003cli\u003e0.5 percent of scale accuracy meets ANSI\/ASME Grade 2A and ASME B40.100 standards\u003c\/li\u003e\n\u003cli\u003e4.5-inch dual-scale analog dial improves readability at a distance\u003c\/li\u003e\n\u003cli\u003eIP65-rated thermoplastic case with polycarbonate lens for wet and wash-down environments\u003c\/li\u003e\n\u003cli\u003eWide operating range of -40 degrees F to 250 degrees F suits diverse service conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style process pressure gauge for industrial and commercial piping systems requiring a lower-mount, 0.5-inch NPT connection with a 4.5-inch dial and a 0 to 30 psi measurement range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed plumber or instrumentation technician familiar with the process system pressure and media involved. Shut off and bleed down the process line to zero pressure before connecting or removing any pressure gauge. Apply thread sealant or PTFE tape to the NPT threads per applicable IPC or facility piping standards, and do not over-torque the fitting to avoid cracking the thermoplastic case. Verify the glycerine fill is intact and the lens is undamaged before returning the system to service.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Range\u003c\/strong\u003e: 0 to 30 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Diameter\u003c\/strong\u003e: 4.5 inches (115 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy\u003c\/strong\u003e: 0.5 percent of scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Type\u003c\/strong\u003e: Analog, Dual Scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 0.5 inches NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Lower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBourdon Tube Material\u003c\/strong\u003e: 316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted Parts Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material\u003c\/strong\u003e: Thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material\u003c\/strong\u003e: Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid Filled\u003c\/strong\u003e: Yes, Glycerine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F (-40 degrees C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F (120 degrees C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\/ASME Grade 2A, ASME B40.100, CRN, IP65, RoHS Compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.55 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WINTERS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PPC5060-G.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WINTERS","offers":[{"title":"Default Title","offer_id":51720882487602,"sku":"PPC5060-G.","price":286.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/155580e4af18bc1f816ccb0d9486e547.jpg?v=1788570450","url":"https:\/\/voomisupply.com\/products\/winters-ppc5060-g-pressure-gauge-0-30-psi-4-5-in-dial","provider":"Voomi Supply","version":"1.0","type":"link"}