{"product_id":"widia-6853747-corner-radius-end-mill-3-4-in-5-flute-carbide","title":"Widia 6853747 Corner Radius End Mill 3\/4 in 5 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe WIDIA 6853747 is a solid carbide corner radius end mill from the Series 570T line, designed for demanding material removal in steel, stainless steel, cast iron, and high-temperature alloys. It carries a 0.030-inch corner radius and a 38-degree medium helix, providing a balance of chip evacuation and cutting stability across roughing and finishing operations. The 5-flute, single-end geometry with close pitch and right-hand flute direction supports controlled chip loads at higher feed rates. WP15PE PVD coating adds wear resistance and thermal protection. This tool is centercutting, allowing direct plunge entry without a pre-drilled pilot hole. It is used with standard straight-cylindrical toolholders in CNC machining centers.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for general-purpose and production machining where a single tool must handle both roughing passes and finishing cuts on ferrous workpieces. Its variable index feature reduces harmonics and chatter during aggressive cuts. Applications include milling slots, pockets, profiles, and contoured surfaces in steel and stainless fabrication, job shop work, and aerospace component machining involving high-temperature alloys. The 2.25-inch length of cut and 5-inch overall length give adequate reach for most standard cavity and wall features without extended-reach tooling.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.030-inch corner radius reduces stress concentrations at the tool nose and workpiece edge\u003c\/li\u003e\n\u003cli\u003eWP15PE PVD coating provides wear resistance across steel, stainless steel, cast iron, and high-temperature alloy materials\u003c\/li\u003e\n\u003cli\u003e5-flute close-pitch design supports high material removal rates in roughing and finishing\u003c\/li\u003e\n\u003cli\u003eVariable index geometry reduces chatter and vibration during aggressive cuts\u003c\/li\u003e\n\u003cli\u003eCentercutting construction allows direct plunge milling without a pre-drilled entry point\u003c\/li\u003e\n\u003cli\u003e38-degree medium helix balances chip evacuation and radial cutting force\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with straight-cylindrical toolholders. Primary workpiece materials include steel, stainless steel, and cast iron. Secondary workpiece material is high-temperature alloy. Part of the WIDIA Series 570T end mill family.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Secure the shank fully within the toolholder to the manufacturer-specified gauge line before tightening; never clamp on the fluted section. Verify runout at the tool tip before beginning a cut, as excessive runout accelerates edge wear and reduces surface finish quality. Follow the machine tool builder and tooling manufacturer feed and speed recommendations for the specific workpiece material and depth of cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.030 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: WP15PE (PVD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Close\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: High-Temperature Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 570T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.959 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WIDIA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6853747\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WIDIA","offers":[{"title":"Default Title","offer_id":67915436785970,"sku":"6853747","price":727.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b219a728d8fa59b96cd0b653b4697cd6.jpg?v=1791253601","url":"https:\/\/voomisupply.com\/products\/widia-6853747-corner-radius-end-mill-3-4-in-5-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}