{"product_id":"widia-6853288-corner-radius-end-mill-1-2-in-3-flute-carbide","title":"Widia 6853288 Corner Radius End Mill 1\/2 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe WIDIA 6853288 is a solid carbide corner radius end mill designed for high-precision material removal in non-ferrous metal applications. It features a 1\/2-inch diameter, a 0.1200-inch corner radius, and three flutes arranged in a right-hand spiral with a variable helix angle of 37 to 39 degrees. The variable helix geometry reduces harmonic vibration during cutting, supporting both roughing and finishing operations in a single tool. At 4.5 inches overall length with a 2.25-inch length of cut, this is a long-series tool suited for reaching into deep pockets and slots. It is centercutting, allowing plunge entry without a pre-drilled start hole.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use in CNC machining centers and milling machines where toolholders with a 1\/2-inch straight-cylindrical shank bore are used. Its bright, uncoated finish and solid carbide construction make it well-matched for non-ferrous materials such as aluminum, copper, and brass, where sharp edges and low friction are critical to surface finish and tool life. The long flute length supports deep slot milling and profiling passes in aerospace, job shop, and precision manufacturing environments. It is a single-end tool from WIDIA Series 3A29.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.1200-inch corner radius reduces stress concentrations at the cutting edge and improves corner wear resistance\u003c\/li\u003e\n  \u003cli\u003eVariable helix (37 to 39 degrees) minimizes chatter and harmonic vibration during cut\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and edge retention in non-ferrous applications\u003c\/li\u003e\n  \u003cli\u003eLong-series flute length of 2.25 inches supports deep pocket and slot milling\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish optimized for aluminum and other non-ferrous metals where coatings can cause built-up edge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard toolholders accepting a 1\/2-inch straight-cylindrical shank. Intended for non-ferrous metal workpiece materials per WIDIA Series 3A29 specifications. Confirm toolholder runout and collet condition before use.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Ensure the machine spindle is fully stopped and locked out before loading or removing the tool from the toolholder. Seat the shank to the full recommended gauge depth in the collet or end mill holder and torque retention screws to the toolholder manufacturer's specification. Verify tool runout with a dial indicator before commencing cuts, as excessive runout on a three-flute tool will cause uneven chip load and accelerated flute wear.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.1200 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 37 to 39 degrees (variable)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3A29\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.325 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WIDIA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6853288\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WIDIA","offers":[{"title":"Default Title","offer_id":67911330791730,"sku":"6853288","price":183.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/770b4abd95bc36afe475346ed73282ed.jpg?v=1791209698","url":"https:\/\/voomisupply.com\/products\/widia-6853288-corner-radius-end-mill-1-2-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}