{"product_id":"weiler-97734-wheel-brush-6-inch-nylon-80-grit-crimped","title":"Weiler 97734 Wheel Brush 6 Inch Nylon 80 Grit Crimped","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe WEILER 97734 is a 6-inch diameter wheel brush designed for surface preparation, deburring, blending, and finishing work across industrial and trade applications. It uses crimped nylon filaments filled with 80-grit silicon carbide abrasive, delivering consistent abrasive action without the aggressive stock removal of wire brushes. The arbor hole mount provides a stable connection to bench grinders, pedestal grinders, and angle grinder arbor setups. With a maximum rated speed of 3,600 RPM, a 1-inch face width, and a 1.25-inch trim length, this brush suits controlled finishing passes on metal, composites, and similar materials. It weighs 0.75 pounds.\u003c\/p\u003e\u003cp\u003eThis wheel brush is used in fabrication shops, maintenance facilities, and field service environments where surface conditioning or finishing is required. The nylon fill with silicon carbide abrasive makes it well suited for work on aluminum, stainless steel, plastics, and composites where steel wire would leave contamination or cause surface damage. It installs on standard arbor-hole grinder setups and is appropriate for tasks such as edge blending, weld prep cleanup, and light deburring. Electricians, pipefitters, fabricators, and general maintenance technicians commonly use this type of brush.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e6-inch outside diameter with 1-inch face width for controlled surface coverage\u003c\/li\u003e\n\u003cli\u003eCrimped nylon filament construction with 80-grit silicon carbide abrasive for consistent finish\u003c\/li\u003e\n\u003cli\u003eArbor hole mount — no shank included, compatible with standard arbor grinder setups\u003c\/li\u003e\n\u003cli\u003eRated to 3,600 RPM maximum operating speed\u003c\/li\u003e\n\u003cli\u003e1.25-inch trim length for stable filament flex and uniform contact pressure\u003c\/li\u003e\n\u003cli\u003eNon-encapsulated design allows filament to conform to part contours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with bench grinders, pedestal grinders, and arbor-mount angle grinder adapters that accept a standard arbor hole wheel brush of 6-inch diameter. Verify arbor diameter matches the 2-inch hole before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by qualified personnel following applicable ANSI B11 and OSHA grinder safety standards. Always power down and lock out the grinder before mounting or removing the brush. Confirm the machine RPM rating meets or exceeds the 3,600 RPM maximum stamp on the brush before operation. Inspect the brush for filament damage before each use and do not exceed the rated speed.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArbor Hole Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Length\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill Material\u003c\/strong\u003e: Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Material\u003c\/strong\u003e: Silicon Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrit\u003c\/strong\u003e: 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: Crimped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Arbor Hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 3,600 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Included\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEncapsulated\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31191521\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WEILER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 97734\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WEILER","offers":[{"title":"Default Title","offer_id":51539179405618,"sku":"97734","price":95.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1ba80b992dc13fd3c7210cebc1987982.jpg?v=1785836055","url":"https:\/\/voomisupply.com\/products\/weiler-97734-wheel-brush-6-inch-nylon-80-grit-crimped","provider":"Voomi Supply","version":"1.0","type":"link"}