{"product_id":"weiler-94660-knotted-wheel-brush-5-inch-carbon-steel","title":"Weiler 94660 Knotted Wheel Brush 5 Inch Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe WEILER 94660 is a knotted wire wheel brush designed for aggressive surface preparation and weld cleaning on metal workpieces. It mounts via a 5\/8-11 threaded arbor and runs at a maximum of 12,500 RPM, making it compatible with standard angle grinders and bench grinders used in fabrication, maintenance, and industrial cleaning work. The brush uses stringer bead twist knotted carbon steel wire in the 0.0200 to 0.0299 inch diameter range, delivering the concentrated cutting action that knotted wire is known for on heavy mill scale, rust, and weld spatter. Welders, pipefitters, and metalworkers are the primary installers and users of this tool.\u003c\/p\u003e\n\u003cp\u003eThis wheel brush is suited for use in industrial, commercial, and job-site environments where thorough deburring, descaling, and surface conditioning are required before welding, coating, or inspection. Its 5-inch outside diameter and 3\/16 inch face width make it well matched to standard 5\/8-11 threaded right-angle grinders. The 7\/8 inch trim length and stringer bead twist knot pattern concentrate wire pressure for consistent stock removal on steel and iron surfaces.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eKnotted stringer bead twist wire for aggressive cutting action on heavy scale, rust, and weld spatter\u003c\/li\u003e\n  \u003cli\u003e5 inch outside diameter with 3\/16 inch face width\u003c\/li\u003e\n  \u003cli\u003e5\/8-11 threaded arbor mount fits standard angle grinder and bench grinder spindles\u003c\/li\u003e\n  \u003cli\u003eCarbon steel fill wire in 0.0200 to 0.0299 inch diameter range\u003c\/li\u003e\n  \u003cli\u003eRated to 12,500 RPM maximum operating speed\u003c\/li\u003e\n  \u003cli\u003e7\/8 inch trim length for consistent wire projection and contact pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with angle grinders and bench grinders equipped with a 5\/8-11 threaded spindle. No shank is included; direct threaded mounting only.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and operation should be performed by qualified tradespeople familiar with abrasive wheel safety. Always power down and disconnect the grinder from its power source before mounting or removing the brush. Verify the tool spindle speed does not exceed the 12,500 RPM maximum rating marked on the brush before operating. Operators should wear appropriate PPE including eye and face protection, and ensure the work area is clear of bystanders, as wire bristles can break free during use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFace Width\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrim Length\u003c\/strong\u003e: 7\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArbor Hole Thread Size\u003c\/strong\u003e: 5\/8-11\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: Knotted Stringer Bead Twist\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFill Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilament Wire Diameter Range\u003c\/strong\u003e: 0.0200 to 0.0299 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 12,500\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Included\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.55 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WEILER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 94660\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WEILER","offers":[{"title":"Default Title","offer_id":51542726770994,"sku":"94660","price":35.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/88b8c5c95b2b2143d7aafb1a7ab10770.jpg?v=1785905512","url":"https:\/\/voomisupply.com\/products\/weiler-94660-knotted-wheel-brush-5-inch-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}