{"product_id":"weiler-93609-wheel-brush-4-in-crimped-carbon-steel","title":"Weiler 93609 Wheel Brush 4 in Crimped Carbon Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe WEILER 93609 is a 4-inch diameter wheel brush designed for surface preparation, deburring, blending, and cleaning on metal workpieces. It mounts via an arbor hole and uses crimped carbon steel wire fill, which provides consistent, flexible contact across irregular surfaces. Rated to 12,500 RPM, this brush handles demanding bench grinder and angle grinder applications. The 0.875-inch trim length and 0.5-inch face width keep the wire action focused and controlled. No shank is included, so the tool must be mounted directly onto a compatible arbor. Fabricators, welders, machinists, and metal finishing technicians are the primary users of this brush type.\u003c\/p\u003e\n\u003cp\u003eThis wheel brush is suited for use in fabrication shops, maintenance facilities, and manufacturing environments where fast, consistent wire brushing is required. Typical applications include weld spatter removal, rust and scale removal, surface cleaning before coating, and edge finishing on ferrous metals. The arbor-hole mount makes it compatible with bench grinders, pedestal grinders, and similar stationary power tools. It is sold as a single unit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCrimped carbon steel wire for flexible, consistent surface contact\u003c\/li\u003e\n  \u003cli\u003e4-inch outside diameter with 0.5-inch face width for focused brushing action\u003c\/li\u003e\n  \u003cli\u003eRated to 12,500 RPM for use on standard bench and pedestal grinders\u003c\/li\u003e\n  \u003cli\u003eArbor-hole mount with no shank included — mounts directly on compatible arbors\u003c\/li\u003e\n  \u003cli\u003e0.875-inch trim length provides controlled wire extension\u003c\/li\u003e\n  \u003cli\u003eWire filament diameter in the 0.010 to 0.019 inch range for general-purpose metal finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or standard consumable for bench grinders and pedestal grinders equipped with a compatible arbor-hole mounting system. Verify arbor hole size on your grinder before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified operator familiar with abrasive wheel safety per ANSI B11 and OSHA 29 CFR 1910.215 standards. Always power down and disconnect the grinder before mounting or removing the wheel brush. Confirm that the tool spindle RPM rating meets or is below the 12,500 RPM maximum stamped on the brush before operation. Wear appropriate eye protection and face shielding during use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFace Width\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrim Length\u003c\/strong\u003e: 0.875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: Crimped\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFill Material\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilament Wire Diameter Range\u003c\/strong\u003e: 0.010 to 0.019 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 12,500\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Arbor Hole\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Included\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.38 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31191521\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WEILER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 93609\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WEILER","offers":[{"title":"Default Title","offer_id":51539360809266,"sku":"93609","price":26.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d4d3702fbe43a983667958306d5a7edc.jpg?v=1785838751","url":"https:\/\/voomisupply.com\/products\/weiler-93609-wheel-brush-4-in-crimped-carbon-steel","provider":"Voomi Supply","version":"1.0","type":"link"}