{"product_id":"weiler-83000-wheel-brush-6-in-crimped-nylon-500-grit","title":"Weiler 83000 Wheel Brush 6 in Crimped Nylon 500 Grit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe WEILER 83000 is a 6-inch diameter wheel brush designed for surface conditioning, deburring, and finishing operations across metal fabrication and industrial maintenance applications. It uses crimped nylon filaments filled with silicon carbide abrasive at 500 grit, making it effective for light stock removal and fine surface blending without aggressive material loss. Mounted via an arbor hole, it fits standard bench grinders and angle grinders rated for the 3,600 RPM maximum speed. The 1-inch face width and 1-1\/4-inch trim length deliver consistent contact across flat and contoured workpiece surfaces. Licensed tradespeople and industrial maintenance technicians are the primary installers and users of this brush.\u003c\/p\u003e\n\u003cp\u003eThis wheel brush is suited for metalworking shops, maintenance facilities, and fabrication environments where controlled surface finishing is required. Its nylon-silicon carbide construction makes it appropriate for work on aluminum, stainless steel, and other materials where a wire brush would leave embedded ferrous contamination. The arbor hole mount allows quick changeover on standard spindle tooling without specialty adapters in most bench grinder setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e6-inch outside diameter with a 1-inch face width for broad surface contact\u003c\/li\u003e\n  \u003cli\u003eCrimped nylon filaments loaded with 500-grit silicon carbide abrasive\u003c\/li\u003e\n  \u003cli\u003eArbor hole mount compatible with standard bench grinder and right-angle grinder spindles\u003c\/li\u003e\n  \u003cli\u003eRated to 3,600 RPM maximum operating speed\u003c\/li\u003e\n  \u003cli\u003e1-1\/4-inch trim length maintains consistent filament pressure during use\u003c\/li\u003e\n  \u003cli\u003eNon-encapsulated, no-shank design for direct arbor mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct arbor-hole-mount wheel brush for bench grinders and angle grinders that accept 6-inch diameter brushes and operate at or below 3,600 RPM.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified technician following the grinder manufacturer's spindle and arbor specifications. Always power down and disconnect or de-energize the grinder before mounting or removing the brush. Confirm the grinder's rated RPM does not exceed the 3,600 RPM maximum for this brush before operation. Wear appropriate PPE including eye and face protection whenever operating abrasive wheel tooling.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFace Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrim Length\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Arbor Hole\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: Crimped\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFill Material\u003c\/strong\u003e: Nylon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAbrasive Material\u003c\/strong\u003e: Silicon Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrit\u003c\/strong\u003e: 500\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilament Diameter Range\u003c\/strong\u003e: 0.0100 to 0.0199 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 3,600 RPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Included\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEncapsulated\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.75 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31191521\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WEILER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 83000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WEILER","offers":[{"title":"Default Title","offer_id":51541434466610,"sku":"83000","price":135.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a5b47e2ba7cfe85b92e8e03064dbce9d.jpg?v=1785876033","url":"https:\/\/voomisupply.com\/products\/weiler-83000-wheel-brush-6-in-crimped-nylon-500-grit","provider":"Voomi Supply","version":"1.0","type":"link"}