{"product_id":"weiler-51216-type-29-flap-disc-40-grit-7-inches","title":"Weiler 51216 Type 29 Flap Disc 40 Grit 7 Inches","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe WEILER 51216 is a Type 29 flap disc engineered for aggressive material removal on metal surfaces. Part of the Tiger X series, it features a ceramic zirconia alumina blend abrasive cloth bonded to a phenolic backing. The conical Type 29 profile maintains consistent abrasive contact during edge work and surface blending, making it a standard choice for welders, fabricators, and metal finishing tradespeople. At 40 grit coarse grade and rated to 8,600 RPM, this disc delivers fast stock removal while holding up to demanding production use on steel and stainless steel applications.\u003c\/p\u003e\u003cp\u003eThis disc is suited for use on 7-inch angle grinders in industrial and fabrication settings, both commercial and job-site environments. Primary applications include weld removal, beveling, and edge deburring on steel and stainless steel workpieces. The 7\/8 inch arbor hole fits standard angle grinder spindles. The coarse 40-grit rating makes it most effective where rapid material removal is the priority rather than fine finishing.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eType 29 conical profile for consistent edge and surface contact during grinding\u003c\/li\u003e\n\u003cli\u003eCeramic zirconia alumina blend abrasive cloth for extended disc life and fast cut rate\u003c\/li\u003e\n\u003cli\u003e40 grit coarse grade suited for weld removal, beveling, and edge deburring\u003c\/li\u003e\n\u003cli\u003ePhenolic backing provides rigidity and support under load\u003c\/li\u003e\n\u003cli\u003e8,600 RPM maximum speed rating for use with standard 7-inch angle grinders\u003c\/li\u003e\n\u003cli\u003eTiger X series construction designed for steel and stainless steel material applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with 7-inch angle grinders equipped with a 7\/8 inch arbor. Suitable for material removal, beveling, and deburring on steel and stainless steel. Verify that the grinder RPM rating meets or exceeds the 8,600 RPM maximum disc speed before use.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eDisc installation and replacement should be performed by a qualified operator following the grinder manufacturer's mounting instructions and ANSI B7.1 safety guidelines. Always confirm the grinder is disconnected from power and the disc guard is properly in place before mounting. Do not exceed the maximum rated speed of 8,600 RPM. Inspect the disc for damage before each use and discard any disc showing cracks, gouges, or delamination.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Diameter\u003c\/strong\u003e: 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Hole Size\u003c\/strong\u003e: 7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlap Disc Type\u003c\/strong\u003e: Type 29\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrit\u003c\/strong\u003e: 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: Coarse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Material\u003c\/strong\u003e: Ceramic Zirconia Alumina Blend\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Type\u003c\/strong\u003e: Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Cloth with Phenolic Backing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 8,600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Type\u003c\/strong\u003e: Arbor Hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Color\u003c\/strong\u003e: Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Beveling, Weld Removal, Edge Deburring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Steel, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Tiger X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Thickness\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.55 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31191506\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WEILER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 51216\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WEILER","offers":[{"title":"Default Title","offer_id":51543495967026,"sku":"51216","price":220.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fbc50b3bb2a0dd0775ad3109e9c79318.jpg?v=1785919507","url":"https:\/\/voomisupply.com\/products\/weiler-51216-type-29-flap-disc-40-grit-7-inches","provider":"Voomi Supply","version":"1.0","type":"link"}