{"product_id":"weiler-10040-end-brush-2-3-4-in-crimped-wire-steel","title":"Weiler 10040 End Brush 2-3\/4 in Crimped Wire Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe WEILER 10040 is a crimped wire end brush designed for surface preparation, deburring, and cleaning applications on steel workpieces. The brush features a 2-3\/4 inch diameter fill area with steel crimped wire and comes pre-flared to match the working angle, reducing setup time and improving contact consistency. A 6 mm diameter shank mounts directly into rotary tools, die grinders, or drill presses. Rated to 16,000 RPM, this brush is suited for high-speed finishing operations where wire flexibility and consistent coverage are required. It is sold individually per package with a minimum order quantity of 2.\u003c\/p\u003e\n\u003cp\u003eThe WEILER 10040 is used in metal fabrication shops, maintenance facilities, and field service settings where controlled wire brushing on steel surfaces is needed. Typical applications include weld prep and post-weld cleanup, rust and scale removal, and edge blending on ferrous components. The pre-flared wire fill conforms to contoured or recessed surfaces, making it practical for port work, pipe interiors, and irregular profiles that flat wheel brushes cannot reach effectively.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e2-3\/4 inch brush diameter with crimped steel wire fill for flexible, consistent contact\u003c\/li\u003e\n  \u003cli\u003ePre-flared design matches working angle out of the box, reducing initial setup\u003c\/li\u003e\n  \u003cli\u003e6 mm shank diameter with 3\/4 inch shank length for compatibility with standard rotary tool chucks\u003c\/li\u003e\n  \u003cli\u003e16,000 RPM maximum speed rating supports high-speed die grinder use\u003c\/li\u003e\n  \u003cli\u003eWire diameter range of 0.0101 to 0.0200 inches provides a balance of aggression and surface finish control\u003c\/li\u003e\n  \u003cli\u003eNot bridled, piloted, or encapsulated — open fill for maximum wire deflection and reach\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with rotary tools, die grinders, and drill presses accepting a 6 mm shank. Intended for material removal and surface conditioning on steel workpieces.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by trade professionals or experienced fabricators using standard rotary tool or die grinder equipment. Ensure the tool is powered off and unplugged before inserting or removing the shank from the chuck. Do not exceed the 16,000 RPM maximum speed rating, and confirm the host tool's rated speed does not exceed this value before operation. Wear appropriate PPE including eye protection and gloves, as wire bristles can shed during use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrush Diameter\u003c\/strong\u003e: 2-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: Crimped\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFill Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Diameter Range\u003c\/strong\u003e: 0.0101 to 0.0200 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 6 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 16,000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlared\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-Flared\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHollow Center\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePiloted\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBridled\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31191521\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WEILER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10040\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WEILER","offers":[{"title":"Default Title","offer_id":51542702424370,"sku":"10040","price":69.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c2e367dda7df5ae07335d4b57504f064.jpg?v=1785904767","url":"https:\/\/voomisupply.com\/products\/weiler-10040-end-brush-2-3-4-in-crimped-wire-steel","provider":"Voomi Supply","version":"1.0","type":"link"}