{"product_id":"walter-titex-6618699-solid-carbide-jobber-drill-9-80-mm","title":"Walter-titex 6618699 Solid Carbide Jobber Drill 9.80 Mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe WALTER-TITEX 6618699 is a solid carbide jobber drill engineered for high-performance drilling in demanding industrial and trade applications. Built to Series DC150-08-A1 standards, it features a 9.80 mm diameter cutting edge, a 140-degree split-point geometry, and a TiNAl (titanium aluminum nitride) coating that extends tool life under elevated cutting temperatures. The straight-cylindrical shank measures 10.00 mm in diameter and 40.00 mm in length, seating securely in standard toolholders. With a flute-to-diameter ratio of 8xD and coolant-through capability, this drill is designed for consistent chip evacuation and thermal management in deep hole work. It is installed and used by machinists, tool-and-die professionals, and maintenance technicians running CNC or manual drilling operations.\u003c\/p\u003e\n\u003cp\u003eThis jobber drill is rated for use in cast iron, non-ferrous metals, steel, superalloys, and titanium — material codes K, N, P, and S. Typical applications include blind hole drilling and stack drilling where point accuracy and edge retention are critical. The 140-degree point angle reduces thrust force on entry and exit, which is particularly valuable when drilling layered or interrupted workpieces. An overall length of 139.00 mm and a flute length of 95.00 mm support reach requirements common in structural and component drilling setups. The drill meets both ANSI and ISO standards, confirming dimensional and performance conformance across tooling systems.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction, grade WJ30TA, for rigidity and edge retention in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003eTiNAl coating improves wear resistance and oxidation resistance at elevated cutting speeds\u003c\/li\u003e\n  \u003cli\u003e140-degree point angle reduces entry thrust and improves positional accuracy\u003c\/li\u003e\n  \u003cli\u003eCoolant-through design supports chip evacuation and thermal control in blind hole applications\u003c\/li\u003e\n  \u003cli\u003e8xD flute-to-diameter ratio enables drilling depths up to 80.00 mm\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank compatible with standard collet chucks and drill chucks\u003c\/li\u003e\n  \u003cli\u003eTwo-flute geometry optimized for blind hole and stack drilling scenarios\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers, drill presses, and manual machines equipped with toolholders accepting a 10.00 mm straight-cylindrical shank. Suitable for workpiece materials including cast iron, non-ferrous metals, carbon and alloy steels, superalloys, and titanium. Conforms to ANSI and ISO dimensional standards. Part of the WALTER-TITEX DC150-08-A1 series, covering drill diameters in the 9.00 mm to 10.00 mm range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use of this drill should be performed by qualified machinists or toolroom technicians familiar with carbide tooling handling procedures. Power down and de-energize the machine spindle before mounting or removing the drill. Seat the straight-cylindrical shank fully in the collet or chuck and verify runout before initiating a cut. Carbide tooling is brittle — avoid side loading, interrupted feeds without proper parameters, or dropping the tool on hard surfaces.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 9.80 mm (0.3858 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Material\u003c\/strong\u003e: Solid Carbide, Grade WJ30TA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiNAl\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 139.00 mm (5.472 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 95.00 mm (3.740 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 80.00 mm (3.150 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 10.00 mm (0.394 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 40.00 mm (1.575 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Length\u003c\/strong\u003e: 1.78 mm (0.070 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 8xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: m7\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron; Non-Ferrous Metal; Steel; Superalloys and Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Blind Hole; Stack Drilling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: DC150-08-A1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI; ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.247 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WALTER-TITEX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6618699\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WALTER-TITEX","offers":[{"title":"Default Title","offer_id":51733676851506,"sku":"6618699","price":315.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/74f65de149453cef1df499fb1e7ec970_3f04884a-1f20-4746-b714-913b4fe3f73a.jpg?v=1788757960","url":"https:\/\/voomisupply.com\/products\/walter-titex-6618699-solid-carbide-jobber-drill-9-80-mm","provider":"Voomi Supply","version":"1.0","type":"link"}