{"product_id":"walter-titex-5691049-taper-length-drill-bit-4-7mm-carbide","title":"Walter-titex 5691049 Taper Length Drill Bit 4.7mm Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe WALTER-TITEX 5691049 is a solid carbide taper length drill bit in the A6589DPP series, designed for demanding precision drilling applications in metalworking and industrial environments. Built from K30F-grade solid carbide with a double point coating, this bit delivers consistent hole quality and extended tool life. The 140-degree X-treme D point geometry reduces thrust and improves centering. A coolant-through design channels cutting fluid directly to the cutting edge, enabling higher feed rates and better chip evacuation. Licensed machinists, tool-and-die makers, and CNC operators use this bit where standard length drills lack the reach or rigidity needed.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for blind hole, cross hole, inclined hole, stack drilling, and through hole drilling operations. The spiral flute configuration with a 12xD flute-to-diameter ratio handles deep-hole drilling in ferrous and non-ferrous metals. A parallel shank conforming to DIN 6535 HA fits standard ER and shrink-fit toolholders commonly found on machining centers and drill presses. The web-thinned, tapered web configuration further reduces cutting resistance at entry.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction in K30F grade for high hardness and wear resistance\u003c\/li\u003e\n\u003cli\u003e140-degree X-treme D point for self-centering entry and reduced thrust\u003c\/li\u003e\n\u003cli\u003eDouble point coating for extended tool life in abrasive materials\u003c\/li\u003e\n\u003cli\u003eCoolant-through design for direct cutting-edge lubrication and chip flushing\u003c\/li\u003e\n\u003cli\u003eWeb-thinned tapered web reduces feed force and heat buildup\u003c\/li\u003e\n\u003cli\u003eDIN 6535 HA parallel shank for broad toolholder compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard ER collet chucks, shrink-fit holders, and drill chucks that accept a 6 mm parallel shank conforming to DIN 6535 HA. Suitable for machining centers, CNC drill presses, and manual drill presses capable of coolant-through delivery.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and setup should be performed by qualified machinists or CNC technicians. Always power down and lock out the machine spindle before loading or removing tooling. Verify that the toolholder bore and collet are clean and within tolerance before seating the shank. Confirm coolant-through passages are clear and that system pressure is set per the machine specification before initiating a drilling cycle.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: A6589DPP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 4.7 mm (0.1850 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: X-treme D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide (K30F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Double Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 64 mm (2.5197 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 102 mm (4.0157 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 6 mm (0.2362 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 36 mm (1.4173 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 56 mm (2.2047 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Length\u003c\/strong\u003e: 0.86 mm (0.0337 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length x Diameter Ratio\u003c\/strong\u003e: 12xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Parallel (Non-Threaded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: m7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Blind Hole, Cross Hole, Inclined Hole, Stack Drilling, Through Hole Drilling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN 6535 HA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.08 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WALTER-TITEX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5691049\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WALTER-TITEX","offers":[{"title":"Default Title","offer_id":51743861637426,"sku":"5691049","price":418.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f83f6db570cf5893f3abc19ad3d47c0a_2ada53c6-063b-46c4-b805-7efe05744247.jpg?v=1788850486","url":"https:\/\/voomisupply.com\/products\/walter-titex-5691049-taper-length-drill-bit-4-7mm-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}