{"product_id":"walter-titex-5062860-micro-drill-bit-wire-86-cobalt","title":"Walter-titex 5062860 Micro Drill Bit Wire 86 Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe WALTER-TITEX 5062860 is a cobalt micro drill bit engineered for precision drilling in demanding materials. Built to DIN 1899 standards, this wire gauge size 86 drill measures 0.0102 inches (0.26 mm) in diameter with a 25 mm overall length. The M35 cobalt steel construction provides the heat and wear resistance needed when cutting titanium alloys and other abrasive workpiece materials. A 118-degree standard point angle combined with a web-thinned, tapered web configuration reduces entry force and helps center the drill accurately on the workpiece. The spiral flute geometry promotes chip evacuation in micro-diameter applications where clogging is a common failure point. A straight-cylindrical shank seats in standard drill chucks and collets without modification.\u003c\/p\u003e\n\u003cp\u003eThis drill is suited for blind hole, through hole, and stack drilling operations in aerospace, precision manufacturing, and electronics applications. Primary workpiece materials include titanium alloys and materials classified under ISO material codes K, N, P, and S. Secondary applications cover glass and graphite workpieces (ISO codes M and O). The 5xD flute-to-diameter ratio supports drilling depths up to 1.40 mm, keeping the tool within its designed operating range for stable, repeatable results. Licensed machinists, aerospace assemblers, and tool-and-die technicians are the typical installers and users of this bit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM35 cobalt steel construction for heat resistance in titanium and hard-alloy drilling\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for accurate self-starting entry\u003c\/li\u003e\n  \u003cli\u003eSpiral flute, right-hand cut geometry promotes chip clearance in micro-depth holes\u003c\/li\u003e\n  \u003cli\u003eDiameter tolerance held to +0.000 to -0.004 mm for tight-tolerance work\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank compatible with standard collets and drill chucks\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish; no coolant-through requirement simplifies setup\u003c\/li\u003e\n  \u003cli\u003eConforms to DIN 1899 specification for consistent dimensional standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in blind hole, stack drilling, and through hole drilling operations on titanium alloy, glass, and graphite workpieces; fits standard straight-cylindrical collets and chucks accepting a 1.00 mm shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the straight-cylindrical shank in a collet or drill chuck rated for micro-diameter tooling before starting the spindle. Verify spindle runout is within specification for sub-0.5 mm diameter tools, as excess runout accelerates breakage at this diameter. Operate within the maximum drilling depth of 1.40 mm per pass to prevent deflection or bit fracture. Retract the spindle and allow the tool to stop completely before measuring or repositioning the workpiece.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire Gauge)\u003c\/strong\u003e: 86\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter (Decimal Inch)\u003c\/strong\u003e: 0.0102 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 25.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.90 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 1.40 mm (0.1000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute By Diameter Ratio\u003c\/strong\u003e: 5xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Cobalt, M35 Grade\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.000 to -0.004 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Titanium Alloy (ISO codes K, N, P, S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Glass, Graphite (ISO codes M, O)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Blind Hole, Stack Drilling, Through Hole Drilling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: A3143\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN 1899\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WALTER-TITEX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5062860\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WALTER-TITEX","offers":[{"title":"Default Title","offer_id":51733340029234,"sku":"5062860","price":185.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4d404aa90efb4001bb66290e41e46960_ce04908e-a8dc-41c6-99f0-2128f4a4dfe7.jpg?v=1788754407","url":"https:\/\/voomisupply.com\/products\/walter-titex-5062860-micro-drill-bit-wire-86-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}